DIY Samsung Galaxy A51 5G A516 Back Cover & Camera Lens Glass Repair Guide

To start we need to have the right tools to proceed with the repair which you can find in the description first take out the sim tray and then the back cover removal to remove the back cover it needs to heat gently around the back coverages until the pasted adhesive becomes soft for this we are using a heating pad place the back core side on the heating pad and select the mobile phone heating option and leave it till it completes alternatively, you can use a heat gun or hair dryer

once the heating has completed use a suction cup to create an opening between the frame and rear cover next insert a plastic car pry tool or something similar to cut the adhesive around the back cover

next on the rear car’s back side apparently heat to soften the camera lens blue and then gently apply pressure to take out the camera lens with the frame

next, take the new camera lens and place it on the rear cover by applying glue around the lens edges most of the time the replacement lens comes with adhesives here we are using b7000 glue to add the camera lens into the frame to make sure the lens has seated and placed securely

next before installing the main back cover make sure it has enough glue on it if not use b7000 glue on your double-sided back cover adhesive

finally, we are adding binding clips to tighten the rear car with the body if not you can use some rubber bands and leave them for some time hope you have enjoyed the camera glass replacement guide let us know if you have any questions