DIY Poco F2 Pro | Xiaomi Redmi K30 Pro Camera Lens Glass Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description. The first step is the back cover removal.

To remove the back cover, it needs to heat gently around the back of the edges until the paste adhesive becomes soft. Carefully work around on the edges, and once you feel the heating is enough, use a suction cup to lift the back cover.

In between, insert a plastic card dry tool and gently cut the adhesive around.

Next, take out the back cover and lift the camera lens by using a pry tool. There is some sticky, but it comes out easily.

There are two ways to replace the camera lens. One is the lens with the frame, and the other one is just the lens. But the cost is almost similar, so it is better to go with the camera lens with the frame.

Next, secure the new camera lens on the board and place the vacuum on the body before installing the main back cover. Make sure it has enough glue on it. If not, use p7000 glue or a new double-sided back cover adhesive.

Hope you have enjoyed the repair guide. Let us know if you have any questions.