DIY Samsung Galaxy A71 | A71 5G Camera Lens Glass & Back Cover Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

First, Take out the SIM tray and then the back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has been completed, Use a suction cup to create an opening between the frame and the rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover, and Next, Apply heat on the camera lens glass. For this, we are using a heat gun. And then slightly apply pressure from the rear side to take out the lens.

Next, Place the new camera lens with adhesive.

Next, if needed, can take out the lens with the frame. First, apply heat on the lens area from the rear side of the back cover.

Next, slightly apply pressure from the front side to take out the lens with the frame.

Next, secure the new camera lens with the frame in the back cover by applying adhesive.

Next, Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the replacement guide.

Let us know if you have any questions