DIY Samsung Galaxy S10 Plus Camera Lens Glass Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

First, Take out the SIM tray and then the back cover removal.

To remove the back cover, it needs to heat gently around the back cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad.

Place the back cover side on the heating pad Select the mobile phone HEATING option and leave it till it completes.

Alternatively, you can use a heat gun or hairdryer.

Once the heating completes, Use a suction cup to create an opening between the frame and the rear cover.

Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, take out the back cover and remove the camera lens:

Apply heat to soften the glue on the camera lens area on the rear side of the back cover.

Once you feel the heating is enough, Apply pressure from the front side to remove the lens with the frame.

Next, you can remove the lens from the frame if needed.

Apply heat and push from the rear side to remove the lens.

There are a few different replacement parts available for this repair.

You can select the camera lens with the frame or the camera lens without the frame or back cover with camera lenses installed.

Please select the required part Replace the new camera lens and apply glue to it.

The replacement camera lens comes with adhesive; otherwise, you can use b7000 glue on the edges.

Finally, ensure it has enough glue before installing the main back cover.

If not, use B7000 glue or a new double-sided back cover adhesive.

I hope you have enjoyed the camera Lens replacement guide.

Let us know if you have any questions;