Now Reading: Redmi Note 10 5G Camera Replacement Guide (Front/Rear) | Also For Redmi Note 10T | Poco M3 Pro 5G
-
01
Redmi Note 10 5G Camera Replacement Guide (Front/Rear) | Also For Redmi Note 10T | Poco M3 Pro 5G
Redmi Note 10 5G Camera Replacement Guide (Front/Rear) | Also For Redmi Note 10T | Poco M3 Pro 5G
If your phone camera is blurry, not focusing, showing a black screen, or crashing when opened, you may need to replace the front or rear camera module. In this detailed step-by-step DIY guide, we’ll show you how to safely replace the camera modules.
This repair guide applies to:
- Xiaomi Redmi Note 10 5G
- Redmi Note 10T 5G
- Poco M3 Pro 5G
These models share a similar internal layout, making the camera replacement procedure nearly identical.
Replacing a faulty camera module can restore image quality, autofocus performance, and video recording functionality without replacing the entire phone.
🔧 Repair Overview
Device Type: Smartphone
Repair Type: Front Camera & Rear Camera Module Replacement
⭐ Repair Difficulty: ⭐⭐⭐⭐⭐☆☆☆☆☆ (5/10 – Moderate)
⏱ Estimated Repair Time: 40 – 60 Minutes
Reasons for Camera Replacement
You may need to replace the camera if:
- Camera app shows black screen
- Blurry or foggy photos
- Autofocus not working
- Camera shaking or not stabilizing
- “Cannot connect to camera” error
- Physical damage after dropping the phone
⚠ Note: The Global version of Redmi Note 10 5G typically includes three rear cameras (main, depth, and macro).
Before You Begin
Compatibility and Model Numbers
- Xiaomi Redmi Note 10 5G
- POCO M3 Pro 5G
- Xiaomi Redmi Note 10T 5G
Model Numbers : M2103K19G, M2103K19C, M2103K19I, M2103K19Y, M2103K19PG, M2103K19PI, M2103K19PY
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx (T2/T3/T4) screwdrivers (Depends on the Region)
- Flathead screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3ZIHCQv
- Screen – https://amzn.to/40hCF1g
- Other Parts – https://amzn.to/4rVnyq4
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Redmi Note 10 5G Series
- Best Premium Case & Protector https://amzn.to/4kMS9UI
- New Redmi Phone are in Clearance https://amzn.to/4aHSVNX
Step-by-Step Camera Replacement
Step 1: Power Off the Device
Turn off the phone completely before starting the repair.
Step 2: Heat the Back Cover
The rear panel is secured with adhesive.
- Place the phone back side down on a heating pad.
- Select mobile heating mode and allow it to complete.
Alternatively, use a heat gun or hairdryer, applying even heat around the edges.
Step 3: Remove the Back Cover
- Use a suction cup to create a gap.
- Insert a plastic pry tool into the opening.
- Slide along the edges to cut through adhesive.
Carefully lift off the rear cover.
Step 4: Remove Camera Lens Frame
- Remove 4 screws securing the camera lens cover.
- Lift the camera lens frame using a pry tool.
Step 5: Remove SIM Tray & Disconnect Fingerprint
- Remove the SIM tray.
- Disconnect the fingerprint sensor flex cable.
Step 6: Remove the Midframe
- Remove 13 screws from top and bottom sections.
- Use a plastic pry tool to release plastic clips.
- Lift and remove the midframe.
Step 7: Disconnect the Battery
Before touching camera connectors:
- Disconnect the battery flex cable to prevent short circuits.
Step 8: Remove the Front Camera
- Locate the front camera module on the motherboard.
- Loosen any adhesive securing it.
- Disconnect the flex cable.
- Gently lift and remove the front camera.
Step 9: Remove Rear Cameras
- Disconnect each rear camera module from the motherboard.
- Carefully lift them out using tweezers.
Replace only the faulty camera module if necessary.
Step 10: Install the New Camera Module
- Place the new front or rear camera into position.
- Connect the flex cable securely.
- Reapply adhesive for the front camera if required.
Ensure all camera connectors are properly seated.
Step 11: Reassemble the Device
- Reconnect the battery plug.
- Reinstall the midframe (13 screws).
- Reconnect fingerprint sensor.
- Insert SIM tray.
- Install camera lens frame (4 screws).
Step 12: Reseal the Back Cover
- Apply new adhesive or B7000 glue if needed.
- Align the rear cover properly.
- Secure using bonding clips or rubber bands.
- Leave secured for at least 30–60 minutes.
Frequently Asked Questions (FAQ)
Q1: How many rear cameras does this model have?
The Global version of Redmi Note 10 5G typically has three rear cameras.
Q2: Will replacing the camera erase my data?
No. Camera replacement does not affect stored data.
Q3: My camera is blurry. Should I replace it?
If cleaning the lens does not fix the issue, the camera module may be damaged and require replacement.
Q4: Do I need to replace all cameras at once?
No. You can replace only the faulty module.
Q5: Can I test the camera before sealing the phone?
Yes. It is recommended to power on and test the camera before resealing the back cover.
Troubleshooting After Camera Replacement
Q1: Camera not opening after replacement?
- Check connector alignment.
- Reconnect the battery.
- Restart the phone.
Q2: Rear camera works but front does not?
Ensure the front camera flex is properly connected and secured.
Q3: Phone shows “Cannot connect to camera”?
- Reseat camera connectors.
- Clear camera app cache.
- Restart the device.
Q4: No network signal after repair?
Check antenna connections and ensure motherboard is properly seated.
Q5: Back cover not sealing properly?
Use fresh adhesive and apply firm pressure with bonding clips for at least one hour.
Front and rear camera replacement on Xiaomi Redmi Note 10 5G is a moderate-level repair that can restore full photo and video functionality. Work carefully when handling camera modules, as they are delicate components.
Always test camera performance before fully sealing the device.
Related
