DIY Cracked Samsung Galaxy S10 Plus Back Cover Glass Replacing Repair Guide

To start, we need to have the right tools to proceed with the repair, which You can find in the description.

First, Take out the SIM tray and then the broken back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heat gun.
Carefully Workaround around the edges, and apply heat to soften the glue on the back cover. Alternatively, you can use a heat Pad or hairdryer.

Once the heating has been completed, Use a suction cup to create an opening between the frame and the rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, take out the broken back cover and place the new back cover with the camera lens.
If you need to place the original camera lens, you can always take it out and install it on the back cover with adhesive.

There are different replacement parts available for this repair. You can select the back cover with the camera lens or without the camera lens installed.

Select the required part and place the back cover with adhesive. The replacement back cover comes with adhesive; otherwise, you can use b7000 glue on the edges.

I hope you have enjoyed the camera Lens replacement guide.

Let us know if you have any questions