DIY Google Pixel 3A XL LCD Touch Screen Glass Repair Guide

To start, we need to have the right tools to proceed with the repair, which you can find in the description.

The first step is the lcd screen removal from the front. To remove the lcd, it needs to heat gently and on the screen edges until the pasted adhesive becomes soft.

Once you feel the heating is enough, use a suction cup to lift the screen a little and insert a plastic card pry tool or something similar to cut the adhesive around the lcd screen.

Lift the screen gradually at about a 45-degree angle and disconnect the connector plug by undoing two screws and removing the metal shield.

If I’m correct, there is an adhesive strip on top of the connector. It looks like it is missing in this device. If you have the adhesive on your phone, peel it off and place it while connecting the new lcd.

Take the new screen and test it before finalizing the installation. Plug the connector and turn on the phone for testing. Check the touchscreen for any dead spots or lcd for any pixels.

Everything looks good. Disconnect the lcd and remove the protector tapes on the new screen.

Next, you can take off the camera holder and earpiece mesh from the old device and place it on the new screen, making sure it sits firmly.

Now you can connect the lcd plug and add the shield by inserting two screws and also the tape, which we don’t have, but you may

Before installing the lcd screen, ensure it has enough glue on it. If not, use b7000 glue or a new double-sided lcd adhesive.

Finally, we add two titan rubber bands to bond the screen to the body. Leave it for some time and remove the rubber bands. On the professional level, you can use screen bonding clips.

Hope you have enjoyed the replacement guide. Let us know if you have any questions.