Now Reading: OnePlus Nord N200 5G Earpiece Speaker Replacement Guide – DIY Repair
-
01
OnePlus Nord N200 5G Earpiece Speaker Replacement Guide – DIY Repair
If your OnePlus Nord N200 5G has a damaged or malfunctioning earpiece speaker, you may experience muffled sound, no sound during calls, or distorted audio. Replacing the earpiece speaker can restore clear sound quality and improve call experiences. This detailed guide walks you through a safe and efficient DIY replacement.
Repair Overview
- Device Type: Android Smartphone
- Model: OnePlus Nord N200 5G
- Type of Repair: Earpiece Speaker Replacement
Repair Difficulty ★★★★☆☆☆☆☆ (4/10 – Moderate)
Estimated Time Required : 30–45 Minutes
Reasons for Earpiece Speaker Replacement
- Distorted or crackling sound during calls
- No sound from the earpiece
- Water or physical damage to the speaker
- Reduced volume or muffled calls
Before You Begin
Compatibility and Model Numbers
- Oneplus Nord N200 5G
- Oppo A93 5G – Simliar Design (Can use Reference to repair)
This repair guide based on OnePlus N200 5G.
Model Numbers | DE2118, DE2117
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 Screwdriver
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3IgZ75c
- Screen – https://amzn.to/46iYhNy
- Other Parts – https://amzn.to/47Hh2N3
- Silicone Work Repair Mat https://amzn.to/45Emz5l
✅ Protect Your Oneplus Nord N200 5G
- Protector For The Screen https://amzn.to/4mcsLq9
- Best Rated Case https://amzn.to/46acCf2
Step-by-Step Earpiece Speaker Replacement
Step 1. Opening the Device
Turn off your phone completely before starting. Begin by carefully removing the back cover. Gently heat the edges using a heating pad or hair dryer to soften the adhesive. Use a suction cup to create an opening and a plastic card to separate the back cover from the phone body.
Step 2. Removing the Midframe
After removing the back cover, take out the SIM tray first. Unscrew all screws securing the midframe. Use a plastic pry tool to gently lift and remove the midframe, working carefully around the edges to release the plastic clips.
Step 3. Disconnecting Components
Disconnect the battery connector and fingerprint sensor cable to safely free the midframe. This prevents any accidental short circuits during the repair.
Step 4. Removing the Logic Board
Carefully remove the logic board from the device. This allows clear access to the earpiece speaker area.
Step 5. Removing the Old Earpiece Speaker
Locate the faulty earpiece speaker and gently remove it from its housing. Use tweezers if necessary to lift it out without damaging nearby components.
Step 6. Installing the New Earpiece Speaker
Place the new earpiece speaker carefully into the same position as the original. Ensure it fits snugly and aligns properly with the housing.
Step 7. Reassembling the Device
Reinstall the logic board, reconnect the battery and fingerprint sensor cables, and place the midframe back. Secure all screws and ensure that all clips are properly fastened. Reinsert the SIM tray.
Step 8. Closing the Device
Before installing the back cover, check if the adhesive is sufficient. If not, apply B7000 glue or a new double-sided adhesive. Align the back cover, press firmly, and secure using binding clips or rubber bands. Allow adequate time for the adhesive to set.
Frequently Asked Questions (FAQ)
Q1: Can I replace the earpiece speaker myself?
Yes, this repair is moderately difficult but achievable if you have the right tools and follow each step carefully.
Q2: How do I know if the earpiece speaker is faulty?
If your calls are muffled, distorted, or there’s no sound, the earpiece speaker may need replacement.
Q3: Will this repair affect other components?
No, as long as you carefully disconnect the battery and fingerprint sensor and avoid applying force to the logic board or connectors.
Q4: What adhesive should I use for the back cover?
B7000 glue or a pre-cut double-sided adhesive works best to ensure a secure seal.
Troubleshooting After Replacement
Q1: No sound after installing the new earpiece?
- Ensure the speaker connector is properly seated.
- Check that the logic board is correctly positioned and all cables are connected.
Q2: Distorted sound persists?
- Verify that the new earpiece speaker is compatible with the OnePlus Nord N200 5G.
- Inspect for debris or misalignment in the speaker housing.
Q3: Back cover not sticking well?
- Apply additional adhesive if needed.
- Use binding clips or rubber bands and leave them for sufficient curing time.
Q4: Fingerprint sensor not working?
- Make sure the fingerprint flex cable is securely reconnected and aligned.
Replacing the earpiece speaker on your OnePlus Nord N200 is a moderate-level repair that can significantly restore your phone’s call audio and sound clarity. With patience, proper heating, and careful disassembly, this repair can be completed successfully at home.
Related Guides
