DIY Samsung Galaxy S10 Plus Battery Repair Guide

To start, we need to have the right tools to proceed with the repair, which You can find in the description.

First, Take out the SIM tray and then the back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad, select the mobile phone HEATING option, and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has been completed, Use a suction cup to create an opening between the frame and the rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover, and Next, Take out the board frame with the wireless coil by undoing NINE screws.

Next, unplug the battery connector and take off the not working battery.

First, apply a little to soften the glue on the battery. For this, we are using a heat gun. Once you feel the heating is enough, use a card pry tool to cut the adhesive under the battery. And Once you have some space, use a pry tool to lift the battery.

Next, Place the New battery with adhesive.

Next, add the sim tray, connect the battery plug, and place the board frame with the wireless coil by adding Nine screws.

Finally, Before installing the main back cover, make sure it has enough glue on it. If not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are using screen binding clips to tighten the back cover to the body. If not, you can use rubber bands and leave them for some time.

I hope you have enjoyed the battery replacement guide.

Let us know if you have any questions;