DIY Xiaomi Redmi K20 | Mi 9T Pro Front Camera Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description.

First, turn off the phone and take out the back cover. to remove the back cover, we are using a heating pad. Place the back side on the heating pad, select the mobile phone heating option, and leave it till it completes.

Alternatively, you can use a heat gun or hair dryer around the cover edges.

Once you feel the heating is enough, use a suction cup to lift the back cover. In between, insert a plastic carburetor tool and gently cut the adhesive.

Next, take out the back car and pull out the board frame by undoing 12 screws.

Next, disconnect the battery connector.

Next, take out the logic board by disconnecting four connector plugs, the antenna head and undoing the board screw. And also, ensure the release of the adhesive on the front camera connector.

Gently lift the board using a tweezer while moving cables.

Next, release the screw on the front camera motor.

Next, gently pull out the front camera through the opening while lifting the motor.

Next, insert the new front camera through the opening.

Next, place and secure the front camera motor by adding the screw next place and secure the logic board.

Next, fold the cable and, secure the front camera connector to the board and also place the adhesive.

Next, secure the main flex lcd flex sensor flex and the antenna head into the logic board.

Next, secure the board by adding the screw.

Next, secure the battery connector.

Next, secure the board frame by adding 12 screws.

Next, before installing the main back cover, make sure it has enough glue. If not, use b7000 glue on your double-sided back adhesive.

Finally, we are adding binding to tie in the back curve with the body if not, you can use some rubber bands and leave them for some time.

Hope you have enjoyed the replacement guide. Let us know if you have any questions.