Now Reading: DIY Motorola Moto G Stylus 2020 XT2043 Earpiece Speaker Repair Guide
-
01
DIY Motorola Moto G Stylus 2020 XT2043 Earpiece Speaker Repair Guide
Hi everyone, Welcome back to geardo.
If your Motorola Moto G Stylus (2020) earpiece speaker is not producing sound during calls, sounds distorted, or is very low in volume, it may need replacement. This is a common issue caused by dust buildup, wear over time, or internal component failure.
In this guide, we will walk you through a step-by-step process to replace the earpiece speaker on the Motorola Moto G Stylus (2020). This is a beginner-friendly repair that can quickly restore clear call audio.
Make sure you have the right tools and follow the steps carefully.
Repair Overview
- Device Type: Smartphone
- Repair Type: Earpiece Speaker Replacement
- Repair Difficulty: ⭐⭐☆☆☆
- Estimated Time: 20–30 minutes
Reasons for This Repair
- No sound during calls
- Low or muffled audio
- Distorted or crackling sound
- Sound only on speaker mode
- Dust or debris affecting the speaker
Check The Latest Motorola Phones are in Clearance “up to 60% off” – https://amzn.to/480ho0w
Before You Begin
Compatibility and Model Numbers
- Motorola Moto G Stylus (2020)
Model Numbers | XT2043, XT2043-4
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 / T5 Screwdriver (Depends on the version)
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/499v2jk
- Screen – https://amzn.to/47HnpOv
- Other Parts – https://amzn.to/4hO2wG5
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Step-by-Step Replacement Guide
Step 1: Power Off and Remove SIM Tray
Turn off the phone completely and remove the SIM tray.
Step 2: Apply Heat
Apply gentle heat around the back cover edges to soften adhesive.
Step 3: Remove Back Cover
Create a gap and carefully pry around the phone to release the clips and remove the back cover.
Step 4: Remove Logic Board Frame
Unscrew and remove the logic board frame.
Step 5: Remove Faulty Earpiece Speaker
Carefully remove the earpiece speaker from its position. Apply slight heat if it is stuck with adhesive.
Step 6: Install New Earpiece Speaker
Place the new earpiece speaker into position and ensure it sits correctly.
Step 7: Reinstall Logic Board Frame
Place the logic board frame back and secure it with screws.
Step 8: Reattach Back Cover
Snap the back cover into place and press along the edges to secure all clips.
Step 9: Final Closure
Ensure the back cover is properly aligned and fully sealed.
Frequently Asked Questions (FAQ)
How do I know if the earpiece is faulty?
If you cannot hear calls unless using speaker mode, the earpiece may be damaged.
Is this repair easy?
Yes, it is a beginner-friendly repair with minimal disassembly required.
Can I clean the earpiece instead of replacing it?
Yes, try cleaning first. If the issue persists, replacement is recommended.
Do I need adhesive for installation?
Yes, adhesive helps secure the speaker properly.
Will this fix call audio issues?
Yes, if the issue is caused by a faulty earpiece speaker.
Troubleshooting
No sound after replacement
Check if the earpiece is properly positioned and connectors are secure.
Low sound quality
Ensure the speaker mesh area is clean and not blocked.
Back cover not closing properly
Check adhesive placement and ensure no parts are misaligned.
Sound cuts in and out
Make sure the earpiece is firmly seated and not loose.
Final Notes
This is a quick and effective repair that can restore clear call audio to your device. Take your time and handle all components carefully.
If you have any questions, feel free to leave a comment or reach out.
Related Guides
