Now Reading: OnePlus 8 Camera Replacement Guide | DIY Repair
-
01
OnePlus 8 Camera Replacement Guide | DIY Repair
If your OnePlus 8 is experiencing blurry photos, unresponsive cameras, or error messages when opening the camera app, it may be time to replace the front or rear camera modules. Replacing the camera can restore image quality and ensure your phone captures sharp and accurate photos again. This guide provides a detailed, step-by-step process to safely replace the camera modules at home.
Repair Overview
- Device Type: Android Smartphone
- Model: OnePlus 8
- Type of Repair: Front & Rear Camera Module Replacement
Repair Difficulty : ★★★★★☆☆☆☆☆ (5/10 – Moderate)
Estimated Time: 40–50 minutes
Reasons for Camera Replacement
- Blurry or distorted photos and videos
- Camera app errors or failure to open
- Physical damage to the front or rear camera lens
- Internal water or impact damage
- Faulty sensor causing autofocus or exposure issues
Before You Begin
Compatibility and Model Numbers
Oneplus 8
This repair guide based on OnePlus 8
Model Numbers | IN2013, IN2017, IN2010, IN2019, IN2011
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 Screwdriver
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3IgZ75c
- Screen – https://amzn.to/46iYhNy
- Other Parts – https://amzn.to/47Hh2N3
- Silicone Work Repair Mat https://amzn.to/45Emz5l
✅ Protect Your Oneplus 8
Best Rated Cases https://amzn.to/3KSEFZF
Top Screen Protection https://amzn.to/4o0cypQ
Step-by-Step Camera Replacement Guide
Step 1. Opening the Device
Power off your OnePlus 8 completely. Heat the edges of the back cover using a heating pad or hair dryer to soften the adhesive. Use a suction cup to lift the back cover carefully, inserting a plastic card to separate it from the frame without cracking the glass.
Step 2. Removing the Logic Board Frame
Unscrew and remove the logic board frame to access both the front and rear camera modules. Keep track of all screws for reassembly.
Step 3. Removing the Broken Rear Camera
Carefully disconnect the rear camera module from the logic board and remove it from its housing. Avoid touching any nearby flex cables or connectors.
Step 4. Removing the Broken Front Camera
Disconnect the front camera module and remove it from the top housing. Handle the camera sensor gently to avoid damage.
Step 5. Installing the New Rear Camera Module
Place the new rear camera module in the original position, aligning it properly with the housing and reconnecting the flex cable securely.
Step 6. Installing the New Front Camera
Insert the new front camera module carefully and reconnect it to the logic board. Ensure proper alignment for optimal performance.
Step 7. Reassembling the Device
Place the logic board frame back into position and secure all screws. Check that all connectors are fully seated.
Step 8. Closing the Device
Apply new adhesive if necessary for the back cover. Align the back cover carefully and press firmly into place. Use binding clips or leave the device on a flat surface for a few hours to ensure the adhesive bonds securely.
Frequently Asked Questions (FAQ)
Q1: Can I replace the OnePlus 8 camera modules myself?
Yes, this is a moderate-level repair that can be done at home with the right tools and careful handling.
Q2: How do I know if the camera needs replacement?
Blurry images, camera errors, or failure of the camera app to launch indicate that the front or rear camera may need replacement.
Q3: Will this repair affect other components?
No, as long as you handle the logic board and flex cables carefully during removal and installation.
Q4: What adhesive should I use for the back cover?
B7000 glue or a pre-cut double-sided adhesive works best for a secure seal.
Troubleshooting After Replacement
Q1: Camera app not detecting the new module?
- Ensure all connectors are properly seated.
- Restart the device and check for software updates.
Q2: Blurry photos after replacement?
- Verify the camera module is correctly aligned.
- Clean the camera lens carefully with a microfiber cloth.
Q3: Back cover not sticking properly?
- Apply additional adhesive if needed and press firmly or use binding clips.
Q4: Device not powering on after reassembly?
- Double-check that all battery and logic board connectors are properly reattached.
Replacing the camera on the OnePlus 8 is a moderate-level repair that can restore full photo and video functionality. With patience, proper tools, and careful handling, you can complete this repair successfully at home.
If you found this guide helpful, feel free to explore more repair tutorials to keep your devices running like new.
Related Guides
