Now Reading: OnePlus 8T Camera Replacement Guide | DIY Repair
-
01
OnePlus 8T Camera Replacement Guide | DIY Repair
Replacing the camera modules on the OnePlus 8T can restore picture quality, fix autofocus issues, and solve problems like blurry images or camera failure. This guide covers how to replace the front camera and all four rear cameras—from opening the device to reassembling it safely. Whether your camera is cracked, not focusing, or completely dead, this complete tutorial will walk you through the process clearly and safely.
Repair Overview
Device Type: Smartphone
Repair Type: Internal Battery Replacement
Repair Difficulty : ★★★★★☆☆☆☆☆ (5/10 – Moderate)
Estimated Time: 45–75 minutes
Reasons for Replacing the Cameras on the OnePlus 8T
- Blurry or unfocused photos
- Camera app crashing or showing black screen
- Scratched or cracked internal camera lenses
- Dust or moisture inside the camera module
- Rear camera experiencing shake or OIS malfunction
- Front camera not activating
- Damaged camera connector or module after a drop
Replacing the individual modules gives your smartphone the chance to regain its original photo performance without replacing the entire device.
Before You Begin
Compatibility and Model Numbers
- Oneplus 8T
- Oneplus 8T+ 5G
This repair guide based on OnePlus 8T
Model Numbers | KB2001, KB2000, KB2003, KB2005, KB2007
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 Screwdriver
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3IgZ75c
- Screen – https://amzn.to/46iYhNy
- Other Parts – https://amzn.to/47Hh2N3
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Oneplus 8T
Protector For The Screen https://amzn.to/4nXZi55
Best Rated Case https://amzn.to/46acCf2
Step-by-Step OnePlus 8T Camera Replacement Guide
Below is your fully refined, blog-ready repair process written in a clean, natural format.
Step 1 – Prepare Tools & Power Off the Device
Before starting, ensure you have the correct tools for the repair. These can be found in the description of your video or product listing.
Turn off the phone completely, then remove the SIM tray.
Once done, begin the process of removing the back cover.
Step 2 – Remove the Back Cover
To remove the back cover, you must soften the adhesive:
- Gently heat the edges of the back cover using a heating pad, heat gun, or hair dryer.
- If using a heating pad, place the back cover side down, select the mobile phone heating option, and allow the cycle to finish.
Once heated, use a suction cup to create an opening between the frame and rear cover.
Insert a plastic pry card and slide it around the edges to separate all adhesive points.
Lift the back cover and set it aside.
Step 3 – Remove the Main Board Frame
Inside the device:
- Remove the protective shield.
- Disconnect the flash connector plug.
- Unscrew all nine screws securing the mainboard frame.
- Lift the frame gently using a pry tool.
Now you will have access to the internal components.
Step 4 – Disconnect the Battery
Before touching any camera modules, disconnect the battery connector to avoid short circuits.
Step 5 – Remove the Rear Camera Module (Four-In-One Unit)
The OnePlus 8T contains four rear cameras housed in a single unit, but they can be removed individually with careful technique.
- Disconnect the four rear camera connectors.
- Lift the full camera assembly out.
Removing Individual Rear Cameras:
- Macro & Depth Cameras:
Apply slight pressure from the top and bottom of the module—they will lift out. - Ultra-Wide Camera:
Peel the protective tape and gently push from the top to release it. - Primary Camera:
This one is strongly glued.
The replacement part normally comes pre-installed in a frame, making removal optional.
Step 6 – Remove the Front Camera
Move to the top right section:
- Peel the adhesive.
- Unplug the connector.
- Lift the front camera module out.
Step 7 – Install the New Cameras
Begin reinstalling the required replacement cameras:
- Insert the new cameras into their positions.
- Ensure each module seats fully into its bracket.
- Lock down all connectors securely.
- Reconnect the battery connector once all cameras are installed.
Double-check alignment so the cameras sit perfectly flat, preventing image distortion later.
Step 8 – Reassemble the Mainboard Area
- Place the mainboard frame back.
- Insert all nine screws.
- Reconnect the flash sensor plug.
- Reinstall the shield.
Step 9 – Reinstall and Seal the Back Cover
Before applying the back cover:
- Check for sufficient adhesive around the edges.
- If needed, use B7000 glue or fresh double-sided adhesive.
Place the back cover onto the body and press firmly around the edges.
Step 10 – Bind the Back Cover
To secure the seal:
- Use binding clips around the frame.
- If unavailable, apply rubber bands evenly.
- Leave them on for some time to allow the glue to cure properly.
Once done, reinstall the SIM tray.
Your OnePlus 8T camera replacement is now complete.
Frequently Asked Questions (FAQ)
Q1: Do I need to replace all four rear cameras?
No. You can replace individual cameras if only one module is faulty.
Q2: Why is the primary camera difficult to remove?
It is glued strongly into the frame. Replacement camera modules usually come pre-mounted in a new frame.
Q3: Will this repair fix blurry photos?
Yes—if the camera module itself was damaged or faulty.
Q4: Is disconnecting the battery necessary?
Yes. This prevents short circuits and protects sensitive components.
Q5: How do I know if I damaged a connector?
The camera may not be detected, or the app may crash immediately upon opening.
Troubleshooting After Camera Replacement
Q1: Camera app shows a black screen.
One or more connectors may not be seated properly. Reopen and recheck all camera plugs.
Q2: Rear camera shaking or vibrating.
This indicates the OIS camera is not secured or is missing its adhesive support.
Q3: Front camera not focusing.
Ensure the module is properly aligned and flush with the frame.
Q4: Back cover lifting after assembly.
Add more adhesive and secure with clips for a longer curing period.
Q5: Photos look hazy or cloudy.
Check for fingerprints or dust on the lens cover before sealing the phone.
Replacing the camera on the OnePlus 8T is a moderate-level repair that can restore full photo and video functionality. With patience, proper tools, and careful handling, you can complete this repair successfully at home.
If you found this guide helpful, feel free to explore more repair tutorials to keep your devices running like new.
Related Guides
