If the camera lens on your OnePlus Nord N10 5G is scratched, cracked, or affecting photo quality, replacing the camera lens glass can restore your phone’s camera clarity. Even a small crack in the lens can cause blurry images, glare, or focus issues.
This beginner-friendly repair guide explains how to safely replace the camera lens or camera lens frame on the OnePlus Nord N10 5G. The repair requires careful heating and removal of the back cover, but it can be completed at home with the proper tools.
✅ Protect Your Oneplus Nord N10 5G
Device: OnePlus Nord N10 5G
Type of Repair: Battery Replacement
Repair Difficulty: ⭐ ⭐ ⭐ ☆ ☆ (Moderate)
Estimated Time Required: 30–40 minutes
You may need to replace the camera lens if you notice:
Replacing the camera lens restores photo clarity and protects the camera sensor from dust and damage.
Compatibility and Model Numbers
This repair guide based on OnePlus 8T
Model Numbers | BE2029, BE2025, BE2026, BE2028
Using proper tools reduces the risk of damaging the phone.
Before starting, ensure you have all the required tools ready for the repair process.
Use a SIM eject tool to remove the SIM tray from the phone.
This prevents damage to the tray or internal components when removing the back cover.
The back cover is attached with adhesive.
Gently heat around the edges of the back cover until the adhesive becomes soft.
You can use:
If using a heating pad, place the phone with the back cover facing down and select the mobile phone heating option. Wait until the heating cycle finishes.
Place a suction cup on the back cover and gently lift it to create a small gap.
Insert a plastic card pry tool into the gap and slide it around the edges to cut the adhesive holding the back cover.
Work slowly to avoid damaging internal components.
Use a heat gun or hairdryer to gently heat the fingerprint sensor area.
This softens the glue holding the fingerprint button.
Hold the Touch ID / fingerprint button carefully while lifting the back cover.
Gently separate the back cover from the phone body.
Using a Phillips screwdriver, remove the four screws securing the camera lens frame.
Carefully lift the frame from the device.
Take the lens out from the frame.
Apply gentle heat to the frame and push the lens from the rear side to remove it safely.
There are two different replacement options available:
If you replace only the lens glass:
Place the camera lens frame back into position on the phone.
Secure it using the four screws removed earlier.
Before reinstalling the back cover, check if the adhesive is still strong.
If not, apply:
Align the back cover and press firmly around the edges.
Allow the adhesive to set properly.
Yes. This repair is possible for beginners if you carefully follow the steps and use the proper tools.
No. In most cases, only the camera lens glass or lens frame needs replacement.
Lens glass replacement requires adhesive and precise placement, while lens frame replacement is easier because the lens is already attached to the frame.
Yes. If scratches or cracks were affecting photos, a new lens will restore image clarity.
Yes. A cracked lens can allow dust or moisture to reach the camera sensor, which can damage it.
Make sure the new lens glass is clean and properly aligned. Dust or fingerprints on the lens can cause blurry images.
Check if the frame clips are aligned correctly and that no debris is trapped underneath.
The original adhesive may have weakened. Clean the edges and apply B7000 glue or new adhesive strips.
Ensure the fingerprint sensor connector was not disturbed during back cover removal.
Related Guides