Now Reading: OnePlus Nord N100 LCD Screen Replacement Guide | DIY Repair
-
01
OnePlus Nord N100 LCD Screen Replacement Guide | DIY Repair
A damaged or malfunctioning display can make your OnePlus Nord N100 nearly unusable—whether due to cracks, touch issues, dead pixels, or complete screen blackout. The good news? You can replace the LCD screen display assembly at home with the right tools and patience. This detailed guide walks you through the full teardown and reassembly process so you can restore your device to perfect working order.
Repair Overview
Device Type: Smartphone
Repair Type: LCD Screen Replacement
Repair Difficulty: ★★★★★★★☆☆☆ (7/10 – Moderate)
Estimated Time: 60–90 minutes
Reasons You May Need to Replace the LCD Screen
A screen replacement is recommended if your device is experiencing:
- Broken or cracked front glass
- Touch not responding properly
- Flickering or horizontal/vertical lines
- LCD bleeding or black spots
- Dead pixels
- Completely dead display (sound works, screen doesn’t)
- Ghost touch issues
- Backlight malfunction
Replacing the screen restores your phone’s usability without needing a full device replacement.
Before You Begin
Compatibility and Model Numbers
- Oneplus Nord N100
This repair guide based on OnePlus N100
Model Numbers | BE2013, BE2015, BE2011, BE2012
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 Screwdriver
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/48bXsIP
- Screen – https://amzn.to/4mbcfqK
- Other Parts – https://amzn.to/4n4zZ12
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Oneplus Nord N100
- Protector For The Screen https://amzn.to/45Vrf7c
- Best Rated Case https://amzn.to/45Vrf7c
Step-By-Step OnePlus Nord N100 LCD Screen Replacement
1. Remove the SIM Tray
Power off the device and eject the SIM tray using a SIM tool.
2. Heat and Remove the Back Cover
Gently heat the edges of the back cover using:
- Heating pad (recommended), or
- Heat gun / hairdryer
Once the adhesive softens, place a suction cup on the back and lift enough to insert a plastic pry card. Work your way around the edges to separate the back cover.
Apply a little extra heat at the fingerprint sensor area to loosen adhesive fully.
3. Remove the Mid-Frame
Undo the 18 screws holding the top and bottom sections of the mid-frame.
Use a pry card to gently release the plastic clips and lift the frame.
4. Disconnect the Battery
Locate and unplug the battery connector on the right-hand side.
5. Remove the Battery
Loosen the adhesive by gently lifting at the edges.
Pull the red pull-tab to remove the battery safely.
6. Remove the Logic Board
Disconnect two connectors and detach both antenna heads.
Gently lift the logic board out of the body.
7. Remove the Earpiece
Apply light heat and carefully lift the earpiece from its slot.
8. Remove Bottom Components
8.1 Remove the Charging Port Cover
Undo one screw and lift the cover.
8.2 Remove Main Flex Cable
Move protective tape aside, then pull the adhesive tab leftward to release and remove the flex.
8.3 Remove Both Antennas
Disconnect and lift them from the frame.
8.4 Remove the Charging Port Board
Lift the board out—the charging port and headphone jack come out together.
8.5 Remove the Vibrator Motor
Apply slight heat and lift the motor out of the frame.
9. Prepare the Replacement Screen
There are two types of replacement screens:
- With frame (recommended)
- Without frame
Screen with frame makes the process easier and reduces alignment errors.
Now you have the frame-only assembly remaining from the old phone.
Reassembling the OnePlus Nord N100
10. Install the Earpiece
Place the earpiece into the new frame.
11. Install the Logic Board
Secure it properly and connect the LCD display plug.
12. Install the Main Flex Cable
Lay it in place and secure it.
13. Install the Vibrator Motor
Press it firmly into position.
14. Install the Charging Port Board
Ensure alignment of charging port + headphone jack.
15. Reinstall Antennas
Place both antennas into their channels and connect them at both ends.
16. Reconnect the Main Flex and Secure Tape
Reconnect both ends of the main flex.
Move the adhesive strip and protective tape to the right side.
17. Reinstall the Battery
Place the battery into position, press lightly, and secure it with adhesive.
18. Replace Charging Port Cover
Add the screw to secure the cover.
19. Reassemble the Mid-Frame
Reconnect the battery connector.
Snap the mid-frame in place and secure all 18 screws.
Reinsert the SIM tray.
20. Reattach the Back Cover
Check for adhesive—add B7000 glue or double-sided adhesive if needed.
Press the back cover until it sits firmly.
21. Apply Binding Clips
Use binding clips or rubber bands to hold the back cover tight.
Leave for 30–60 minutes to ensure proper sealing.
Frequently Asked Questions (FAQ)
Q1: Should I buy a screen with or without the frame?
A screen with the frame is easier to install and gives better alignment.
Q2: My phone doesn’t turn on after reassembly—why?
Common causes:
– Loose battery connector
– LCD flex not fully clicked in
– Logic board not seated properly
Q3: Can I reuse the old back cover adhesive?
Only if it’s still sticky and intact. Otherwise use B7000 or new adhesive strips.
Q4: Does replacing the screen affect water resistance?
Yes—once opened, the phone loses any factory water sealing.
Troubleshooting Guide
Q1: The new screen shows no display.
Check LCD connector on the logic board—reseat it properly.
Q2: Touch is not responding.
Ensure the screen flex is not bent or pinched.
Q3: Back cover not closing properly.
Add fresh adhesive and use rubber bands for pressure.
Q4: Phone vibrates but no image appears.
Battery connector may be loose or display cable not fully inserted.
Replacing the LCD screen on your OnePlus Nord N100 is a moderate-level repair that can significantly extend your phone’s lifespan. With patience, proper heating, and careful disassembly, this repair can be completed successfully at home.
If you found this guide helpful, feel free to share it and leave a comment with your experience.
Related Guides
