OnePlus Nord N100 Ringer Speaker Replacement Guide | DIY Repair

If your OnePlus Nord N100 has stopped producing sound from the loudspeaker, the ringer cover may be damaged or loose. In this guide, I’ll walk you through the complete process of removing the faulty ringer cover and installing a new one—clean, simple, and exactly the way I like to present repairs.

Repair Overview

Repair Difficulty: ★★★★★★☆☆☆☆ (6/10 – Moderate)

Estimated Time: 45–60 minutes

---

Reasons for Ringer Cover Replacement

You may need to replace your OnePlus Nord N100 ringer cover if:

• Ringer is not loud enough or muffled
• Physical damage to the cover
• Loose or broken ringer cover clips
• Dust or moisture has accumulated inside

Replacing the ringer cover ensures proper sound output and protects the internal components from damage.

A damaged ringer cannot be repaired internally—replacing it is the best fix.

---

Before You Begin

Compatibility and Model Numbers

• Oneplus Nord N100

This repair guide based on OnePlus N100

Model Numbers | BE2013, BE2015, BE2011, BE2012

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Torx T3 / T4 Screwdriver
• Flathead Screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

Using proper tools reduces the risk of damaging the phone.

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/48bXsIP
  • Screen – https://amzn.to/4mbcfqK
  • Other Parts – https://amzn.to/4n4zZ12
• Silicone Work Repair Mat https://amzn.to/45Emz5l

Protect Your Oneplus Nord N100

• Protector For The Screen https://amzn.to/45Vrf7c
• Best Rated Case https://amzn.to/45Vrf7c

---

Step-by-Step OnePlus Nord N100 Ringer Speaker Replacement

Step 1: Opening the Device

Begin by gently opening the OnePlus Nord N100 from the back side. Use a plastic pry tool and work slowly around the edges. The goal is to lift the back panel without damaging the clips or leaving marks.

---

Step 2: Removing the Back Cover

Once the edges are loosened, lift the back cover away from the frame. Keep it safely aside—it will be needed during reassembly. Make sure not to tug too hard, as some models may have adhesive points.

---

Step 3: Removing the Mid-Frame

Next, remove the mid-frame that secures the internal components. Unscrew the frame using a precision screwdriver and lift it carefully. This section protects your speaker assembly, so keep your screws organized for later.

---

Step 4: Removing the Faulty Ringer Cover

Now you can access the ringer cover. If your device’s speaker hasn’t been working, this cover may be damaged, dusty, or improperly seated.

Gently lift and remove the old ringer cover to reveal the speaker area beneath it.

---

Step 5: Installing the New Ringer Cover

Place your new OnePlus Nord N100 ringer cover into position. Make sure it sits perfectly—alignment is important for sound output and proper vibration response.

Press it slightly to ensure firm placement.

---

Step 6: Re-assembling the Mid-Frame

Reposition the mid-frame over the internal components and secure it back with the screws you removed earlier. Make sure it sits flush without gaps.

---

Step 7: Closing the Device & Final Assembly

Attach the back cover again and press around the edges until it snaps back into place. Finish the process by ensuring the frame is fully sealed and the phone is securely closed.

Your OnePlus Nord N100 is now reassembled, and the new ringer cover should restore proper loudspeaker performance.

---

Frequently Asked Questions (FAQ)

Q1: Is it safe to replace the ringer cover at home?

Yes, if you follow the steps carefully and use proper tools, the process is safe.

Q2: Will replacing the ringer cover fix sound issues?

Yes, replacing a damaged or misaligned ringer cover restores proper sound output.

Q3: Do I need to replace the back cover adhesive?

Yes, new adhesive ensures the back cover is secure and prevents dust or moisture entry.

Q4: How long does the repair take?

Approximately 30–45 minutes depending on experience.

---

Troubleshooting

Q1: Phone ringer still muffled after replacement

• Ensure the ringer cover is properly seated.
• Check for debris inside the ringer area.

Q2: Back cover not sealing properly

• Apply additional adhesive.
• Use binding clips or rubber bands for proper pressure.

Q3: Internal components appear loose

• Check that all screws and clips are fastened.
• Ensure mid-frame is properly aligned before closing.

---

Replacing the ringer speaker on your OnePlus Nord N100 is a moderate-level repair that can significantly restore your phone’s sound functionality. With patience, proper heating, and careful disassembly, this repair can be completed successfully at home.

If you found this guide helpful, feel free to share it and leave a comment with your experience.

Related Guides

• More OnePlus Nord N100 Repari Guides
• Check Oneplus 8T Repair Guides