Now Reading: Samsung Galaxy A13 Speaker Replacement Guide
-
01
Samsung Galaxy A13 Speaker Replacement Guide
Hi everyone, welcome back to DIYGeardo.
Today, we’ll show you how to replace the loudspeaker (ringer) on the Samsung Galaxy A13 4G mobile phone.
If your phone has low volume, distorted sound, crackling audio, or no ringer sound at all during calls, notifications, or media playback, replacing the loudspeaker module is often the best solution. This guide covers the complete speaker replacement process using safe and reliable repair methods.
Before starting, make sure the phone is powered off and you have the right tools, which you can find linked in the description.
Estimated Repair Time
⏱ 20–30 minutes
Repair Difficulty
🛠 Easy
Compatibility and Model Numbers
This repair guide based on Samsung Galaxy A13 4G device, but it also compatible with Galaxy M13 4g and Galaxy F13 models.
Compatible Mode Numbers l SM-A135F, SM-A135F/DS, SM-A135M, SM-A135U, SM-A135U1, SM-A135N, SM-A137F, SM-A137F/DSN, SM-A137F/DS, SM-M135F, SM-M135F/DSN, SM-E135F, SM-E135F/DS
Before You Begin
Required Tools
- Heating pad / heat gun / hairdryer
- Suction cup
- Plastic card pry tools / opening picks
- Phillips screwdriver
- Adhesive (B7000 or double-sided back cover adhesive)
- Bonding clips or rubber bands (optional but recommended)
Make sure the phone is turned off and the SIM tray is removed before starting.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/4mwa41Z
- Screen – https://amzn.to/4n0XV4X
- Other Parts – https://amzn.to/41lzman
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Step-by-Step Repair Instructions
Step 1: Power Off & SIM Tray
First, turn off the phone completely.
Remove the SIM tray and prepare the device for back cover removal.
Step 2: Remove the Back Cover
Create a small gap near the SIM slot or charging port using a picker or plastic card pry tool.
Insert the pry tool and gently move around the phone to release the plastic clips on the frame.
⚠️ Be careful when lifting the back cover, as the fingerprint sensor flex is attached.
Step 3: Remove the Board Frame
Undo the screws securing the board frame and carefully lift it out of the phone.
Step 4: Remove the Speaker Cover
Undo the screws securing the speaker cover located at the lower section of the phone and remove it.
Step 5: Remove the Charging Port Board
Disconnect the charging port flex cable.
Undo the securing screws and gently lift out the charging port board from the frame.
Step 6: Remove the Faulty Speaker (Ringer)
Locate the loudspeaker module in the lower housing.
Carefully lift out the faulty speaker. If lightly adhered, apply gentle heat to loosen it.
Step 7: Install the New Speaker
Place the new Galaxy A13 4G loudspeaker (ringer) into position.
Ensure it sits flat and aligns correctly with the sound outlet.
Step 8: Reinstall the Charging Port Board
Place the charging port board back into position and secure it with screws.
Reconnect the flex cable properly.
Step 9: Reinstall the Speaker Cover
Reinstall the speaker cover and secure it using the screws removed earlier.
Step 10: Reinstall the Board Frame
Position the board frame back onto the phone and secure it with screws.
Final Step: Close the Phone
Reconnect the fingerprint sensor flex if required.
Snap the back cover into place and press around the edges to secure all clips.
Insert the SIM tray, power on the phone, and test the speaker.
FAQs
1. What are common symptoms of a faulty Galaxy A13 speaker?
Low volume, crackling sound, distorted audio, or no sound during calls and notifications.
2. Is the loudspeaker and earpiece the same component?
No. The loudspeaker (ringer) is used for media and alerts, while the earpiece is for call audio.
3. Do I need to remove the screen to replace the speaker?
No. This repair is performed entirely from the back side of the device.
4. Can water or dust damage the speaker?
Yes. Moisture or debris can damage the speaker diaphragm over time.
Troubleshooting FAQs – After the Repair
1. No sound after speaker replacement
Check that the charging port board flex cable is fully connected.
2. Sound is muffled or very low
Ensure the speaker is properly aligned with the sound outlet and not blocked.
3. Phone doesn’t power on after reassembly
Recheck the battery connection and board frame installation.
Related Guides
