DIY Huawei P30 Charging Port Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, take out the Sim tray, and then follow with the back cover removal.

Here, we are using a heating pad to remove the back cover; place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once you feel the heating is enough,
use a suction cup to lift the back cover. In between, Insert a Plastic Card pry tool and gently cut the adhesive.

Take out the back cover and,
Next, remove the board bracket by undoing nine screws.

Next, unplug the battery connector.

Next, move to the bottom and undo seven screws that are securing the speaker and the bracket.

Next, disconnect the antenna head and release the antenna.

Next, pull out the bracket.

Next, take out the speaker by disconnecting the plug.

Next, take out the not working charging port board by disconnecting the antenna head, main flex, touch id camera, and headphone jack connectors.

Next, Place the new charging port board on the body.

Next, secure the touch id camera, headphone jack, main flex, and the charging board’s antenna head.

Next, place the speaker and secure the connector.

Next, place and connect the antenna head.

Next, place the bracket and secure seven screws.

Next, secure the battery connector and place the board frame by adding nine screws.

Next, Before installing the main back cover, make sure it has enough glue; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to fasten the back cover. Leave it for some time and remove it; if not, use some rubber bands to tighten the back cover.

I hope you have enjoyed the battery replacement guide. Let us know if you have any questions.