DIY OPPO Find X3 Lite | Reno 5 5g Camera Lens Glass & Back Cover repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, Take out the Sim tray and then the back cover removal.

To remove the back cover,it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the rear cover side on the heating pad. Select the mobile phone heating option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover, and Next, Apply heat to the camera lens glass. There are four camera lens rings; select the broken glass ring and apply heat. And then slightly apply pressure from the rear side to take out the lens.

Next, Place the new camera lens ring with adhesive.

Next, follow the same steps for other broken camera rings.

Next, if needed, can take out the lens with the frame. First, apply heat to the lens area from the front side of the back cover.

Next, slightly apply push from the front side to take out the lens with the frame.

Next, secure the new camera lens with the frame in the back cover by applying adhesive.

Next, Before installing the main back cover, make sure it has enough glue; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the repair guide. Let us know if you have any questions.