DIY Samsung Galaxy A51 LCD Screen Repair Guide

To start we need to have the right tools to proceed with the repair which you can find in the description first let’s start with the rear power removal for this we are using a heating pad place the rear cover side on the heating pad and select the mobile phone heating option and leave it till heating completes alternatively you can use a heat gun or hair dryer once the heating has completed use a suction cup to create an opening between the frame and the rear cover next we can insert a plastic carburetor tool or something similar to cut the adhesive around the back cover

now take out the rear cover and sim tray then undo 15 screws on the back card frame

next using a plastic carburetor tool create an opening to separate the backup frame be gentle and work around the edges to release the plastic clips

Take out the frame and disconnect the battery connector on the top left and the LCD connector on the bottom right

before installing the new screen to the body connect the screen and test the screen and its functionality for this pull out the power and volume flex cable from the back car frame by using a tweezer to gently peel out the

line Next connect the new screen to the logic board and turn on the device by clicking the battery plug and button place the power flex on the logic board and touch the contact by using a pry tool

next test the screen and its functionality and once the verification has passed turn off the phone

Then again disconnect the LCD and battery plugs and disconnect both ends on the main flex and take it out Next disconnect the antenna and undo the screw to pull out the logic board next apply the heat to remove the broken LCD and touch screen by the frame for this you can use a heating pad heat gun or hairdryer here we are using a heating pad face the screen side on the pad and select the mobile phone heating option once the heating has done by using a suction cup gently lift the screen to create a gap and next by using a plastic car pry tool gently move around the phone to release the adhesive within the frame and LCD this process may take some time and then pull out their cd screen by using a bright hole

next, add double-sided adhesive ob7000 glue on the frame edges where the LCD

seating Next remove the tapes insert the LCD flex through the opening and then place the screen securely on the frame

next, add binding clips or rubber bands to bind the screen with the frame [Music] next place the logic board by adding the screw and then plug the antenna lcd battery and main flex connectors into the logic board

next on the back of the frame place the power and volume flex cable

next, secure the backup frame with the body make sure the plastic clips have been fastened, and power on the phone to verify the functionality

next, secure the background frame by adding 15 screws and the sim tray

before installing the main back cover ensure it has enough glue on it if not use b7000 glue or new double-sided backup adhesive

once again we are adding binding clips to tighten the back cover and LCD with the body if not you can use rubber bands and leave them for some time hope you have enjoyed the screen replacement guide let us know if you have any questions