DIY Xiaomi Redmi Note 10 Pro BN53 Battery Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description.

First, turn up the phone take out the sim tray, and then follow with the back car removal.

To remove the back cover, it needs to heat gently around the back cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad. Select the mobile phone heating option and leave it till it completes.

Alternatively, you can use a heat gun or hair dryer once the heating has completed use a suction cup to create an opening between the frame and back cover.

Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the back cover and remove the mid-frame by undoing 16 screws from the top and bottom sections.

Then, using a plastic card pry tool, create an opening to separate the backup frame. Be gentle and work around the edges to engage the plastic clips.

While you are taking out the frame, be gentle. The fingerprint flex is attached to the mid-frame. Disconnect the flex cable to release the mid-frame from the body. Also, disconnect the battery plug.

Next, take out the battery by using the adhesive. First, loosen the adhesive on both sides. Then, pull it by the tab. Be gentle, and if the battery.

Next, place the new battery on the body and secure it with adhesive.

Next, connect the fingerprint and battery plug. And then, secure the mid-frame by adding 16 screws and the sim tray.

Before installing the main back cover, make sure it has enough glue on it. If not, use v7000 glue on your double-sided backup adhesive.

Finally, we added binding clips to time the back cover with the body. If not, you can use some rubber bands and leave them for some time.

Hope you have enjoyed the replacement guide. And let us know if you have any questions.