Now Reading: OnePlus 8 Pro Camera Replacement Guide | DIY Repair
-
01
OnePlus 8 Pro Camera Replacement Guide | DIY Repair
If your OnePlus 8 Pro cameras have stopped working, produce blurry images, or show black screens, replacing the camera modules is the best solution. This guide walks you through a complete, professional-style camera replacement—perfect for DIY repair enthusiasts looking to restore full photo and video quality.
Repair Overview
- Device Type: Android Smartphone
- Model: OnePlus 8 Pro
- Type of Repair: Rear & Front Camera Replacement
Repair Difficulty : ★★★★☆☆☆☆☆ (4/10 – Moderate)
Estimated Time: 35–55 minutes
Reasons for Camera Replacement
- Rear or front camera not opening
- Blurry images or focusing issues
- “Camera Error” messages
- Visible dust or damage inside the lens
- Water or drop damage affecting image quality
Before You Begin
Compatibility and Model Numbers
- Oneplus 8 Pro
This repair guide based on OnePlus 8 Pro
Model Numbers | IN2023, IN2020, IN2021, IN2025
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 Screwdriver
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heat Mat / Heating Pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Suction Cup https://amzn.to/3UVb6YR
- Silicone Work Repair Mat https://amzn.to/45Emz5l
- Glue | Adhesive https://amzn.to/47UTKmE
✅ Protect Your Oneplus 8 Pro
- Best Rated Cases https://amzn.to/47fTWen
- Top Screen Protection https://amzn.to/4qzYIwi
Step-by-Step Camera Replacement Guide
Step 1. Opening the OnePlus 8 Pro
Begin by powering off your device. Heat the edges of the back cover with a heating pad, heat gun, or hair dryer to soften the adhesive. Use a suction cup and plastic pry card to gently lift and separate the back cover.
Step 2. Removing the Logic Board Frame
Inside the device, remove the screws holding the logic board frame in place. Carefully lift the frame and set it aside to reveal the camera modules.
Step 3. Removing the Faulty Rear Camera
Locate the rear camera module and disconnect its connector from the logic board. Lift the damaged rear camera out of the housing and remove it completely.
Step 4. Removing the Faulty Front Camera
Next, disconnect the front camera connector. Remove the old front camera carefully from its slot.
Step 5. Installing the New Rear Camera Module
Place the new rear camera module into its housing and reconnect its flex cable firmly to the logic board.
Step 6. Installing the New Front Camera
Insert the new front camera into position and reconnect its cable securely.
Step 7. Reassembling the Logic Board Frame
Reposition the logic board frame over the camera area and tighten all screws to secure it.
Step 8. Closing the Device
Before closing, ensure the back cover adhesive is still strong. If weak, apply B7000 glue or new double-sided adhesive. Align the cover and press firmly. Use binding clips or rubber bands to ensure a solid seal while the adhesive cures.
Frequently Asked Questions (FAQ)
Q1: Can I replace both cameras at the same time?
Yes—this guide is designed exactly for that. Replacing both together saves time.
Q2: What if the camera still doesn’t work after replacement?
The issue may be software-related, or the connector may not be seated properly. Reopen and check connections.
Q3: Do I lose my photos after replacing the camera?
No. Camera hardware replacement does not affect stored data.
Q4: Will the new camera affect phone quality?
If you use OEM or high-quality replacement parts, image quality will remain excellent.
Troubleshooting After Replacement
Q1: Camera app still shows an error.
- Recheck both camera connectors
- Restart the device
- Clear the camera app cache
Q2: Rear camera not focusing.
- Ensure the camera is seated perfectly flat in the housing
- Try cleaning the external lens glass
Q3: Front camera looks blurry.
- Remove any protective shipping film left on the module
- Ensure adhesive debris is not blocking the lens window
Q4: Back cover won’t seal properly.
- Remove remaining old adhesive
- Apply fresh B7000 glue or a new adhesive strip
Replacing the camera on the OnePlus 8 Pro is a moderate-level repair that can significantly restore your device’s photo and video functionality. With patience, proper tools, and careful handling, you can complete this repair successfully at home.
If you found this guide useful, you’re welcome to explore additional repair tutorials to help keep your devices operating at peak performance.
Related Guides
