Now Reading: Poco X3 NFC Camera Replacement Guide | Front & Rear (POCO X3 PRO / X3)
-
01
Poco X3 NFC Camera Replacement Guide | Front & Rear (POCO X3 PRO / X3)
Poco X3 NFC Camera Replacement Guide | Front & Rear (POCO X3 PRO / X3)
If the camera on your Xiaomi Poco X3, Poco X3 NFC, or Poco X3 Pro is blurry, not focusing, showing a black screen, or failing to open, the camera modules may need replacement.
The Poco X3 series uses separate modular camera units for the rear (main, macro, depth, wide) and the front selfie camera. This makes camera replacement a straightforward DIY repair with basic tools. This guide covers both front and rear camera replacement, and the steps are compatible across all Poco X3 models due to their similar internal design.
Repair Overview
- Compatible Models: Xiaomi Poco X3, Poco X3 NFC, Poco X3 Pro
- Repair Type: Front & Rear Camera Replacement
- Repair Difficulty: ⚠️⚠️ Medium
- Time Required: 25–40 minutes
- Risk Level: Low to Moderate
Reasons to Replace the Poco X3 Cameras
- Camera shows black screen or won’t open
- Blurry photos or focus not working
- Camera app crashes
- Rear camera not detecting macro, depth, or wide lenses
- Front camera not working during video calls
- Dust, moisture, or physical damage to camera modules
Before You Begin
Compatibility and Model Numbers
- POCO X3 NFC
- POCO X3
- POCO X3 Pro
Model Numbers : MZB07Z0IN, MZB07Z1IN, MZB07Z2IN, MZB07Z3IN, MZB07Z4IN, MZB9965IN, M2007J20CI, M2007J20CG, M2007J20CT, M2102J20SG, M2102J20SI
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3HR26Bi
- Screen – https://amzn.to/4mZPXsI
- Other Parts – https://amzn.to/3HR26Bi
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Poco X3 Series
- Protector For The Screen https://amzn.to/4gdWWw9
- Best Rated Case https://amzn.to/4fPcV3e
Step-by-Step Camera Replacement Guide
Step 1: Remove the Back Cover
Power off the phone completely. Heat gently around the back cover edges to soften the adhesive.
- Place the back cover side on a heating pad and select the mobile heating option
- Alternatively, use a heat gun or hairdryer
Create an opening using a suction cup and slide a plastic pry tool around the edges to cut the adhesive. Remove the back cover carefully.
Step 2: Remove the Board Frame
Undo 11 Phillips screws securing the board frame. Lift and remove it carefully.
Step 3: Disconnect the Battery
Unplug the battery connector on the left-hand side to prevent short circuits.
Step 4: Remove the SIM Tray
Remove the SIM tray and set it aside.
Step 5: Remove Rear Auxiliary Cameras
From the front side of the logic board, disconnect and remove:
- Macro camera
- Depth camera
- Wide-angle camera
Step 6: Remove the Front Camera
Disconnect the front (selfie) camera and lift it out from the logic board.
Step 7: Remove the Primary Rear Camera
Gently flip the logic board and disconnect the main rear camera from the board.
Installing the New Cameras
Step 8: Install the Main Rear Camera
Place the new primary rear camera into position and secure the connector. Reinsert the SIM tray.
Step 9: Install Macro, Depth, and Wide Cameras
Place the macro, depth, and wide camera modules back into their slots and connect them securely.
Step 10: Install the Front Camera
Place and connect the front camera module carefully.
Step 11: Reconnect Battery and Board Frame
Reconnect the battery connector. Reinstall the board frame and secure it using 11 screws.
Step 12: Seal the Back Cover
Check the back cover adhesive. If needed, apply B7000 glue or a new double-sided adhesive.
Press the back cover firmly and use binding clips or rubber bands for several minutes.
Frequently Asked Questions (FAQ)
Q: Can I replace only one camera, or do I need to replace all?
A: You can replace any individual camera module separately.
Q: Is this guide valid for Poco X3 Pro and X3 NFC?
A: Yes. The camera layout and replacement steps are the same across all Poco X3 models.
Q: Will camera replacement affect my data?
A: No, but backing up your data before repair is always recommended.
Troubleshooting (After The Repair)
Q: Camera app still shows black screen after replacement
A: Recheck the camera connector and ensure it is properly seated.
Q: One rear camera not working
A: That specific camera module may not be connected correctly or may be faulty.
Q: Front camera not detected
A: Reseat the front camera connector and restart the device.
Final Notes
Replacing the front and rear cameras on the Xiaomi Poco X3 series is a simple modular repair that restores full camera functionality without soldering. Work gently with connectors and always test the camera before sealing the device.
Related Guides
