Hi everyone, welcome back to Geardo!
Today we will show you how to replace the rear camera lens glass and the back cover on the Samsung Galaxy S20 FE models.
Before starting the repair, make sure you have the correct tools ready. You can find the full tools list in the description below.
Begin by ejecting and removing the SIM tray.
To remove the back cover, you must soften the adhesive around the edges.
We are using a heating pad for this repair.
Place the back cover side on the pad, select the Mobile Phone Heating option, and let it complete the cycle.
If you don’t have a heating pad, a heat gun or hairdryer will also work.
Once heated:
Lift and remove the back cover completely.
To remove the broken or scratched camera lens:
Once heated enough, push from the inside of the back cover and the camera lens frame will pop out.
There are two types of replacement parts available:
We recommend using the camera lens with the frame. It is easier, faster to install, and usually the price difference is minimal.
Place the new camera lens frame into the opening.
Most new lenses come with pre-installed adhesive. If your part does not include adhesive:
Before installing the back cover:
Place the back cover back onto the frame and press it firmly for proper bonding.
You have successfully replaced the camera lens on the Samsung Galaxy S20 FE.
If you found this repair helpful, feel free to like, share, and comment on our videos.
And don’t forget to hit the Subscribe button!
Replacing the camera lens resolves issues such as:
It also allows you to replace or reseal the back cover if it’s damaged or weakened during the repair.
You can choose either:
Using the lens with frame also helps properly align and seal the back cover.
Yes.
Since the back cover is removed to access the camera lens, you can replace it at the same time.
Just apply new adhesive or B7000 glue when installing the replacement back cover.
No. The lens is attached to the back cover, not the camera module.
You only need to remove the back cover and then replace the lens.
Yes, slightly. Opening the back cover breaks the original seal.
To restore protection, use:
Most replacement lenses come with pre-installed adhesive.
If not, apply a thin layer of B7000 glue around the edges before installation.
Yes. Scratches, cracks, or dust on the lens glass can cause blurry images, light flares, or focusing issues.
Replacing the lens restores full camera performance.
Related Repair Guides