Now Reading: Samsung Galaxy Tab A7 10.4″ Screen Replacement Guide | T500 T505
-
01
Samsung Galaxy Tab A7 10.4″ Screen Replacement Guide | T500 T505
Samsung Galaxy Tab A7 10.4″ Screen Replacement Guide | T500 T505
Hi everyone, welcome back to DIYGeardo.
Today, we will show you how to replace the LCD Touch Screen assembly on the Samsung Galaxy Tab A7 10.4 (2020), T500 and T505 models.
If your screen is cracked, unresponsive, or displaying dead pixels, this step-by-step guide will help you replace the screen safely and correctly.
Repair Information
Device: Samsung Galaxy Tab A7 10.4 (2020)
Models: T500 / T505
Repair Type: LCD Touch Screen Assembly Replacement
Estimated Time: 45–60 minutes
Repair Difficulty: ⚠️⚠️⚠️ Moderate
Before You Begin
Compatibility and Model Numbers
This repair guide based on Samsung Galaxy Tab A7 10.4-inch 2020 T505 Model.
Also Compatible with Both Wifi and Cellular Edition models.
Model Numbers | SM-T500, SM-T505, SM-T505N
Required Tools
- Heating pad / heat gun / hairdryer
- Suction cup
- Plastic card pry tools / opening picks/ Tweezers
- Phillips screwdriver #00 / #000
- Adhesive (B7000 or double-sided back cover adhesive)
- Bonding clips or rubber bands (optional but recommended)
Make sure the tablet is turned off and the SIM tray is removed (For Cellular Version)before starting.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/4fC8rNj
- Touch Screen – https://amzn.to/4lwRUvs
- Other Parts – https://amzn.to/45U9jJS
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Galaxy A7 Tablet
- Screen Protector Glass For The Screen https://amzn.to/3JAbaLe
- Best Cases For Your Galaxy Tab https://amzn.to/4196PEY
Step-by-Step LCD Touch Screen Replacement Guide
Step 1: Power Off & Screen Removal
First, turn off the tablet completely.
To remove the LCD screen, heat the edges gently until the adhesive softens.
For this repair, we are using a heating pad.
Place the tablet screen-side down on the heating pad, select the tablet heating option, and leave it until the cycle completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating is enough, use a suction cup to lift the screen slightly.
Insert a plastic pry tool or card and carefully cut the adhesive around the LCD screen.
If your screen is cracked, gently remove the broken pieces and clean the edges well.
Next, gently lift and flip the screen to rest on the body.
Step 2: Disconnect Battery and LCD
Remove the battery connector bracket by undoing the screw.
Disconnect the battery connector.
Next, undo the two screws to remove the LCD bracket.
Disconnect the LCD connector plug, and the screen unit can now be removed from the body.
Step 3: Transfer LCD Flex Cable
Disconnect and pull out the LCD flex cable from the broken screen.
Place and secure the LCD flex cable on the new screen.
Connect the LCD flex to the logic board, then reconnect the battery plug.
Step 4: Test the New Screen
Test and verify the functionality of the new screen to ensure touch and display are working properly.
Step 5: Reassembly
Secure the LCD flex cable bracket by tightening the screw.
Secure the LCD bracket by adding two screws and the battery bracket by adding one screw.
Step 6: Screen Installation
Before installing the LCD screen, ensure it has enough adhesive.
If not, use B7000 glue or a new double-sided LCD adhesive.
Gently slide in the screen from the bottom and then to the top.
Apply slight pressure around the screen edges.
Finally, add bonding clips to fasten the LCD screen.
Leave it for some time and then remove the clips.
If bonding clips are not available, use rubber bands to tighten the screen to the body.
We hope you have enjoyed this replacement guide.
Let us know if you have any questions.
Please like, share, and comment on our videos, and don’t forget to hit the subscribe button for more repair guides.
Thanks for watching!
FAQs
1. Does the Galaxy Tab A7 T500 and T505 use the same LCD screen?
Yes, both T500 and T505 models use the same LCD Touch Screen assembly and the same replacement procedure.
2. Do I need to remove the back cover to replace the screen?
No. The screen is replaced from the front. You only need to remove the LCD screen and access the internal brackets.
3. Can I replace only the glass without changing the LCD?
No. The screen is fused (LCD + digitizer), so you need to replace the full LCD Touch Screen assembly.
4. Is heating required for screen removal?
Yes. Heating is necessary to soften the adhesive and safely remove the screen without damaging it.
5. What adhesive should I use for reassembly?
Use B7000 glue or a double-sided LCD adhesive to ensure the screen is sealed properly.
6. Do I need to disconnect the battery before removing the screen?
Yes. Always disconnect the battery first to prevent short circuits and damage to the motherboard.
Troubleshooting – After The Repair
1. Screen not turning on after replacement
Check the LCD connector and make sure it is properly seated and locked.
2. Touch not working or unresponsive
Recheck the LCD flex cable and connector. Ensure it is clean and properly aligned.
3. Screen flickering or showing lines
This usually happens due to a loose connection or damaged flex cable. Reconnect and test again.
4. Screen lifting after installation
This means the adhesive is not strong enough. Apply fresh glue and use bonding clips or rubber bands for a longer time.
Related Guides
Samsung Galaxy Tab A7 Battery is Draining?
