Xiaomi Redmi Note 10 Ringer Speaker Replacement | Note 10s

If your Xiaomi Redmi Note 10 or Redmi Note 10S has a weak, distorted, or non-working ringer speaker, replacing the ringer speaker may help restore clear sound for incoming calls, notifications, and other audio played through the speaker.

A damaged ringer speaker can cause audio to sound unusually quiet, distorted, or unclear. In some cases, there may be no sound from the ringer speaker at all.

In this guide, we show you how to replace the ringer speaker on the Xiaomi Redmi Note 10 and Redmi Note 10S. The repair involves opening the phone, removing the back cover, camera lens frame, and midframe, replacing the non-working ringer speaker, and then reassembling the phone.

The same repair procedure shown in this guide applies to both the Redmi Note 10 and Redmi Note 10S.

Repair Information

Information	Details
Devices	Xiaomi Redmi Note 10 / Redmi Note 10S
Repair Type	Ringer Speaker Replacement
Repair Difficulty	★★★☆☆
Estimated Time	30–45 minutes

Reasons for the Repair

You may need to replace the ringer speaker if you notice:

• The phone’s ringer speaker is not producing sound.
• Incoming call or notification sounds are unusually quiet.
• Ringer audio sounds distorted or unclear.
• Speaker output has become noticeably weaker than before.
• The ringer speaker is damaged and needs replacement.

These symptoms can have other possible causes, so they do not necessarily confirm that the ringer speaker itself is faulty.

---

Before You Begin

Compatibility and Model Numbers

• Redmi Note 10  
• Redmi Note 10s

Model Numbers : M2101K7AI, M2101K7AG, M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL

Battery Model BN59

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Torx (T2/T3/T4) screwdrivers
• Flathead screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery –  https://amzn.to/4nnTu3U
  • Screen – https://amzn.to/3WPEvEP
  • Other Parts – https://amzn.to/3JqYKWm
• Silicone Work Repair Mat https://amzn.to/45Emz5l

Step-by-Step Ringer Speaker Replacement

Step 1: Open the Phone

Begin by preparing the Xiaomi Redmi Note 10 or Redmi Note 10S for disassembly.

The phone needs to be opened before the internal components can be accessed.

Step 2: Remove the Back Cover

Carefully remove the rear back cover from the phone.

Work around the edges carefully when separating the cover from the body.

Step 3: Remove the Camera Lens Frame

Next, remove the camera lens frame to access the components underneath.

Step 4: Remove the Midframe

Remove the midframe from the phone.

Carefully separate the frame from the body so that the internal components are not damaged.

Step 5: Remove the Non-Working Ringer Speaker

Next, remove the non-working ringer speaker from the phone.

Carefully remove the existing speaker before installing the replacement.

Step 6: Install the New Ringer Speaker

Place the new ringer speaker into position.

Make sure the replacement speaker is correctly positioned before continuing with the reassembly.

Step 7: Reinstall the Midframe

Place the midframe back into position.

Make sure it is properly seated before continuing with the remaining reassembly.

Step 8: Reinstall the Camera Lens Frame

Place the camera lens frame back into position.

Step 9: Close the Phone and Install the Back Cover

Finally, close the phone and reinstall the back cover.

Make sure the back cover is properly positioned and secured to complete the repair.

FAQ

Why is my Redmi Note 10 or Note 10S ringer speaker not working?

A damaged or faulty ringer speaker can cause the phone to produce little or no sound from the ringer speaker. However, software settings or other hardware issues can also affect audio output.

Why is my Redmi Note 10 ringer speaker very quiet?

Low speaker volume can have several possible causes. If the speaker itself is damaged or has deteriorated, replacing it may help restore normal sound output.

How do I know if the ringer speaker needs replacement?

No sound, unusually low volume, or distorted ringer audio may be reasons to investigate the speaker. These symptoms alone do not definitively prove that the speaker is faulty.

Is this ringer speaker replacement guide compatible with the Redmi Note 10S?

Yes. The repair procedure shown in this guide applies to both the Xiaomi Redmi Note 10 and Redmi Note 10S.

What needs to be removed to access the ringer speaker?

The repair procedure involves opening the phone and removing the back cover, camera lens frame, and midframe before removing the non-working ringer speaker.

What is installed after replacing the ringer speaker?

After installing the new ringer speaker, the midframe and camera lens frame are placed back into position before the phone is closed and the back cover is installed.

Troubleshooting

The ringer speaker is still not working after replacement.

If there is still no sound after replacing the speaker, the ringer speaker may not be the only possible cause. Other hardware or software issues may need to be investigated.

The replacement speaker sounds unusually quiet.

Check that the replacement speaker has been correctly positioned during reassembly. If the problem remains, another issue may be affecting the audio output.

The speaker sounds distorted after the repair.

Make sure the new ringer speaker is properly positioned and that the phone has been correctly reassembled.

The midframe does not sit correctly after replacing the speaker.

Check that the ringer speaker and other internal components are properly positioned before placing the midframe back into position.

The back cover is not staying securely attached.

Check that the rear cover is properly positioned and that its adhesive is suitable for securing it to the phone body.

Conclusion

Replacing the ringer speaker can help restore normal audio output when the original speaker is damaged or no longer working correctly.

This guide covers the ringer speaker replacement procedure for both the Xiaomi Redmi Note 10 and Redmi Note 10S, from opening the phone and removing the necessary components to installing the replacement speaker and reassembling the device.

Related Guides

View Other Xiaomi Redmi Note 10 Repair Guides

Check Poco F3 Repair Guides