DIY Google Pixel 4 Front Camera Repair Guide

To start, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone and follow the back cover removal.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

While removing the back cover, be gentle. The flash sensor plug connects with the back cover.

Next, take out the bracket by undoing five screws.

Next, take out the sensor bracket by undoing two screws.

Next, disconnect the battery plug and sensor plug from the board. And now the back cover unit can leave the body.

Next, take out the bracket by undoing four screws.

Next, take out the front camera & sensor module by disconnecting three plugs and undoing two screws.

Next, place the front camera module by adding two screws and three connector plugs.

Next, place the board bracket by adding four screws.

Next, connect the bak cover sensor flex to the board and place the bracket by adding two screws.

Next, secure the bottom bracket by adding five screws.

Next, Before installing the main back cover, make sure it has enough glue; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to press the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the replacement guide.Let us know if you have any questions.