DIY Google Pixel 4a LCD Touch Screen Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

The first step is the LCD screen removal from the front.

To remove the screen, it needs to heat gently around the screen cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the front screen side on the heating pad. Select the mobile phone heating option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once you feel the Heating is enough, use a suction cup to lift the screen a little and insert a plastic card pry tool or something similar to cut the adhesive around the LCD screen.

Next, Lift the screen gradually to about a 90% degree angle from the top and pull out the lcd connector bracket by undoing two screws.

Next, disconnect the lcd connector to free the screen from the body.

Next, clean the edges for adhesive strips or broken glass bits.

Next, connect the new screen for testing; once the testing has passed,

Place and connect the lcd screen connector to the logic board. And then add two screws with the bracket.

Next, Before securing the LCD Screen, ensure it has enough glue; if not, use B7000 glue or a new double-sided LCD adhesive.

Gently slide in the screen from the bottom and then to the top. Slightly apply pressure on screen edges.

Finally, we are adding bonding clips to fasten the lcd screen. Leave it for some time and remove it; if not, use some rubber bands to tighten the screen to the body.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.