DIY Huawei P20 lite LCD Screen Glass Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone and then remove the back cover.

Here, we are using a heating pad to remove the back cover, Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once you feel the heating is enough, use a suction cup to lift the back cover. In between, Insert a Plastic Card pry tool and gently cut the adhesive.

While taking out the back cover, Be gentle; the fingerprint plug is attached to the back cover.

Next, remove the fingerprint bracket by undoing two screws.

Next, disconnect the battery plug and disconnect the fingerprint plug. Now the back cover unit can leave from the body.

Next, take out two main board brackets by undoing six screws.

Next, disconnect the LCD and Main ribbon plugs and pull out the sim tray.

Next, gently lift out the logic board using a tweezer.

Next, take out the earpiece module.

Next, take out the button bracket and then take out the flex by applying heat. Gently pry the cable from the frame.

Next, take out the speaker cover by undoing seven screws.

Next, pull out the charging & headphone jack board by releasing the antenna cable.

Next, apply heat to soften the glue on the battery. For this, we are using a heat gun. Once you feel the heating is enough, use a pry tool to cut the adhesive under the battery.

The only remaining part is the broken front screen assembly with the frame.

For the replacement, there are two different screen types in the market. The one is with the frame, and the other is without the frame. It can be original, used, or aftermarket.

Either version you choose, you can get with the frame and without. But the most straightforward repair will be with the frame, and also, the price difference is not that big.

I recommend you go with a screen with the frame installed. It can be original, refurbished, used, or aftermarket. And this type is commonly available to purchase.

Next, on the new screen frame, start placing removed parts.

First, place and secure the button flex and the bracket.

Next, place the ear speaker.

Next, place and secure the logic board. Ensure the placement and secure the sim tray.

Next, place the battery with adhesive.

Next, connect the LCD plug and secure the bracket by adding the screw.

Next, place the logic board bracket by adding six screws.

Next, place the charging & headphone jack board in the frame with the antenna & main flex. COnfirm the antenna placement, and connect to the board.ALso connect the main flex.åå

Next, secure the speaker cover by adding six screws.

Next, connect the fingerprint and battery plug to the board.

Next, place the bracket by adding two screws.

Next, Before installing the main back cover, make sure it has enough glue; if not use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to fasten the back cover. Leave it for some time and remove it; if not, use some rubber bands to tighten the back cover.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.