DIY Motorola Moto G Power 2021 XT2117 Battery Repair Guide

Before Starting, we need the right tools to proceed with the repair, which You can find in the description.

First, Take out the back cover from the body. To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes.

Alternatively, you can use a heat gun or hairdryer.

Next, create an opening using a suction cup and then insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, gently take out the back cover.

Next, pull out the logic board frame with the lens by undoing eleven screws.

Next, Disconnect the battery plug.

Next, pull out the not working battery from the body.

First, apply heat to soften the glue under the battery.

And then, use a pry or card pry tool to cut the adhesive under the battery.

Next, gently pull out the battery from the body.

Next, place and secure the new battery with adhesive.

Next, connect the battery plug and secure the board frame by adding eleven screws.

Next, Before installing the main back cover, ensure it has enough glue.

If not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body.

If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the camera Lens replacement guide. Let us know if you have any questions.