DIY Poco F3 GT | Redmi K40 Gaming Camera Glass Lens Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description.

First, turn off the phone and take out the sim tray. And then follow with the back cover removal. To remove the back cover, it needs to heat gently around the back of the edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad and select the mobile phone heating option, and leave it till it completes.

Alternatively, you can use a heat and gun or hair dryer. Once the heating has been completed, use a suction cup to create an opening between the frame and the back cover.

Next, insert a plastic card pry tool or something similar to cut adhesive around the back cover.

Next, on the phone body, apply the heat to soften the glue on the camera lens frame, and then gently, using a pry tool or tweezer, take out the camera lens with the frame.

Next, take the replacement camera lens with the frame and place it on the body by adding adhesive for the repair. There can be two different replacement parts: the camera lens with the frame or the camera lens without the frame, but we suggest you take the camera lens with the frame.

Next, before installing the main back cover, make sure it has enough glue on it. If not, use b7000 glue on your double-sided back cover adhesive.

Finally, we added binding to time the back cover to the body. If not, you can use some rubber bands and leave them for some time.

Hope you have enjoyed the replacement guide, and let us know if you have any questions.