DIY Realme X2 Pro Back Cover & Camera Lens Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which you can find in the description.

The first step is the battery cover removal. To remove the back cover, it needs to heat gently around the rear edges until the paste adhesive becomes soft.

Carefully work around the edges, and once you feel the heating is enough, use a suction cup to lift the back cover.

In between, insert a plastic carpet tool and gently cut the adhesive around.

If your camera lens has not broken, remove the lens and the frame from the broken back cover. Apply a little heat to soften the glue on the camera lens frame edges. Give a slight push on the camera lens to take it out, then transfer it to the new back cover.

Now take off the adhesive protector cover on the new back cover

Next, apply adhesive around the camera lens frame edges before installing it on the back cover.

Insert the camera lens from the rear side and make sure it sits firmly.

Finally, add the main back cover. A quick knot: we are adding two tightened rubber bands to bond the back cover.

Leave it for some time and remove the rubber bands. On the professional level, you can use cream binding clips.

Hope you have enjoyed the back replacement guide. Let us know if you have any questions.