DIY Samsung Galaxy A22 5G Battery Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

First, Take out the back cover from the body.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Next, create an opening using a suction cup and then insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, take out the back cover and remove four screws to take out the camera lens with the frame:

Next, undo twelve screws in the mid-frame and eject the sim tray.
Next, use a plastic card pry tool to create an opening to separate the mid-frame. Be gentle and work around the edges to free the plastic clips.

While pulling out the mid-frame, be gentle; the button flex is attached to the frame.

Next, disconnect the battery connector.

Next, unplug the button connector from the logic board to release the mid-frame from the body.

Next, disconnect the LCD and main flex connectors from the board.

Next, remove the not working battery from the body.

First, apply heat or add isopropyl alcohol to soften the glue on the battery. Then, use a plastic card pry tool or something similar to cut the adhesive. Be gentle in this process and pull out the battery using a pry tool.

Next, place the new battery with adhesive.

Next, secure the LCD and main flex connectors to the board.

Next, secure the button flex.

Next, secure the battery plug.

Next, place and secure the mid-frame by adding 12 screws.

Next, secure the camera lens with the frame by adding four screws.

Next, Before installing the main back cover, ensure it has enough glue. If not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the camera Lens replacement guide.

Let us know if you have any questions