DIY Samsung Galaxy A22 5G Camera Lens Glass & Back Cover Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

First, Take out the back cover from the body.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad.

Place the back cover side on the heating pad Select the mobile phone HEATING option and leave it till it completes.

Alternatively, you can use a heat gun or hairdryer.

Next, create an opening using a suction cup and then insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Next, take out the back cover and remove four screws to take out the camera lens with the frame:

Next, take out the broken lens from the frame.

Apply heat and push from the rear side to take out the lens.

There are a few different replacement parts available for this repair.

You can select the camera lens with the frame or the camera lens without the frame.

I recommend you go with the camera lens with the frame, closer to the lens only price.

If you select only the lens, apply the lens to the frame with adhesive.

Next, place the new camera lens with the frame to the body by adding four screws.

Next, ensure it has enough glue before installing the main back cover.

If not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tighten the rear cover with the body.

If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the camera Lens replacement guide.

Let us know if you have any questions