POCO F3 Camera Lens Glass Replacement Guide & Back Cover Change Guide | Redmi K40 Pro / Xiaomi Mi 11X/11i

Hi everyone, welcome back to Geardo.
Today, we will show you how to replace the back cover (rear housing) and camera lens glass on the Poco F3, also known as the Xiaomi Mi 11X and Redmi K40.

If your back cover is cracked, scratched, or the camera lens glass is damaged, this guide will help you replace either just the lens, just the back cover, or install a new back cover with the camera lens pre-installed—which is often the easiest option.

---

Repair Overview

• Device Type: Smartphone
• Repair Type: Back Cover & Camera Lens Replacement

Repair Difficulty: ★★☆☆☆ (Easy–Moderate)

• Estimated Time: 20–30 minutes

---

Reasons for Replacement

• Cracked or scratched back cover
• Broken or scratched camera lens glass
• Dust entering through damaged lens
• Cosmetic damage to rear housing
• Upgrading to a new back cover (with lens pre-installed)

---

Before You Begin

Compatibility and Model Numbers

• Redmi K40 Series ( Redmi K40 / K40 Pro / K40 Pro Plus) 
• Xiaomi 11x / 11i Series
• Poco F3 Series

Model Numbers : M2012K11AG, M2012K11AC, M2012K11C, M2012K11AI, M2012K11I

This guide is based on the Redmi K40, which shares identical design with the Poco F3 and Xiaomi Mi 11X / Xiaomi Mi 11i. These are rebranded regional models, but always watch for minor internal differences during the repair.

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Torx (T2/T3/T4) screwdrivers
• Flathead screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/4t0Aw6W
  • Screen – https://amzn.to/48hkKfR
  • Other Parts – https://amzn.to/4cF5E69
• Silicone Work Repair Mat https://amzn.to/45Emz5l

---

 Protect Your Phone 

• Best Premium Case https://amzn.to/4cF5E69 
• Screen Protector https://amzn.to/423YP86

---

Important Note (Compatibility)

This guide is based on the Redmi K40, which shares identical design with the Poco F3 and Xiaomi Mi 11X. These are rebranded regional models, so the process is the same.

---

Step-by-Step Back Cover Removal

Step 1: Power Off & Remove SIM Tray

Turn off the phone and remove the SIM tray.

---

Step 2: Heat the Back Cover

• Apply gentle heat around the edges
• Use a heating pad (recommended) or heat gun/hairdryer
• Heat until adhesive softens

---

Step 3: Remove the Back Cover

• Use a suction cup to lift slightly
• Insert a plastic card or pry tool
• Carefully cut through the adhesive
• Lift and remove the back cover

---

Option 1: Replace Only Camera Lens Glass

Step 4: Remove Damaged Lens

• Apply heat directly on the camera lens area
• Gently push out the broken lens from the rear side

Step 5: Install New Lens

• Clean old adhesive and dust
• Place new lens glass
• Secure using adhesive

---

Option 2: Replace Camera Lens with Frame

Step 4: Remove Lens with Frame

• Apply heat to the lens area from the rear side
• Gently push out the lens + frame

Step 5: Install New Lens with Frame

• Apply adhesive
• Align and press the new lens frame into place

---

Option 3: Replace Full Back Cover (Recommended ✅)

This is the easiest and cleanest method.

Step 4: Prepare New Back Cover

• Use a replacement back cover with camera lens pre-installed
• Ensure adhesive is already applied or add new adhesive

Step 5: Install New Back Cover

• Align the new back cover with the frame
• Press firmly around edges

---

Final Step: Seal the Device

• Ensure proper adhesive is applied
• Press the back cover firmly
• Use clips or rubber bands
• Leave for some time to ensure proper bonding

---

FAQs

Q1: Should I replace only the lens or the full back cover?

If your back cover is damaged, replacing the full back cover with lens pre-installed is easier and cleaner.

Q2: Is back cover replacement easy?

Yes, it’s one of the easiest smartphone repairs.

Q3: Do I need to open internal components?

No, this repair only involves removing the back cover.

Q4: Can I reuse old adhesive?

No, always use new adhesive for proper sealing.

Q5: Will replacing the lens improve camera quality?

Yes, if the issue is caused by scratches or cracks on the lens.

---

Troubleshooting (After The Repair)

Q1: Back cover not sticking properly

• Use new adhesive or B7000 glue
• Apply pressure with clips longer

Q2: Dust inside camera after repair

• Clean thoroughly before sealing
• Avoid working in dusty environment

Q3: Lens misaligned

• Reheat slightly and adjust before adhesive sets

Q4: Camera still blurry

• Remove protective film
• Clean lens properly

Q5: Back cover not sitting flush

Ensure proper alignment before pressing

Check for leftover adhesive

Related Repair Guides

View More POCO F3 Repair Guides

POCO X3 Battery is Not Charging