
To start, we need to have the right tools to proceed with the repair, which You can find in the description.
First, Take out the SIM tray and then the back cover removal.
To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on the heating pad Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has been completed, Use a suction cup to create an opening between the frame and the rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Next, take out the back cover and take out the Main Board frame with the wireless coil by undoing the screws. First, Undo nine screws and then gently lift the frame using a pry tool.
Next, Disconnect the battery plug.
Next, Move to the bottom and take the Speaker Cover by undoing seven screws.
Next, undo the screw securing the secondary charging board.
Next, disconnect the Touch ID camera, main ribbon flex, and LCD flex connectors.
Next, disconnect the charging port connection cable from the logic board.
Next, take out the secondary charging port board from the body. Be gentle, and lift the board.
Next, place the new charging port board in the body.
Next, Secure the screw, touch id camera, main flex, and lcd plug into the secondary board.
Next, secure the charging port cable to the logic board.
Next, secure the speaker cover by adding seven screws,
Next, secure the battery plug.
Next, place the mainboard frame with the coil to the body. Secure the frame by adding nine screws.
Next, Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the Battery replacement guide.
Let us know if you have any questions;





