Now Reading: Samsung Galaxy A71 Main Flex Replacement Guide | DIY Motherboard Flex Repair
-
01
Samsung Galaxy A71 Main Flex Replacement Guide | DIY Motherboard Flex Repair
Samsung Galaxy A71 Main Flex Replacement Guide | DIY Motherboard Flex Repair
Hi everyone, welcome back to Geardo.
In this guide, we’ll walk you through how to replace the main flex cable on the Samsung Galaxy A71 4G mobile phone.
If your phone has charging issues, display problems, or random disconnections, the main flex cable could be faulty. This repair is relatively quick and beginner-friendly, as it doesn’t require removing too many internal components.
🔧 Repair Overview
- Device Type: Smartphone
- Repair Type: Main Flex Cable Replacement
- Repair Difficulty: ⭐⭐☆☆☆ (Easy–Moderate)
- Estimated Time: 20–30 minutes
🔍 Reasons for This Repair
- Phone not charging properly
- Intermittent display or touch issues
- Connectivity problems between components
- Device not detecting certain hardware
- Physical damage to internal cable
Before You Begin
Compatibility and Model Numbers
- Samsung Galaxy A71 4G
This repair guide based on Samsung Galaxy A71 4G Model.
Model Numbers | SM-A715F, SM-A715F/DS, SM-A715F/DSN, SM-A715F/DSM, SM-A715W, SM-A715X
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/4ogQEhS
- Screen – https://amzn.to/43nafEZ
- Other Parts – https://amzn.to/4oqla9h
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Protect Your Galaxy A71
- Best Rated Case https://amzn.to/3WDBTd9
- Screen Protector https://amzn.to/42IPsvz
🔌 Step-by-Step Main Flex Replacement Guide
Step 1: Heat the Back Cover
Gently warm the edges of the back cover to soften the adhesive using a heating pad, heat gun, or hairdryer.
Step 2: Create Opening
Use a suction cup to create a slight gap between the back cover and the frame.
Step 3: Remove Back Cover
Insert a plastic card or pry tool and carefully slide it around the edges to cut through the adhesive. Remove the back cover.
Step 4: Remove SIM Tray
Eject the SIM tray before continuing.
Step 5: Remove Screws
Unscrew all screws securing the mid-frame.
Step 6: Remove Mid-Frame
Use a plastic pry tool to release the clips and lift off the mid-frame.
Step 7: Disconnect Battery
Disconnect the battery connector to prevent any electrical damage.
Step 8: Remove Faulty Main Flex Cable
Locate the main flex cable connecting the top and bottom boards.
Carefully disconnect it from both ends and remove it.
Step 9: Install New Main Flex Cable
Place the new flex cable and connect it securely on both ends.
Step 10: Reconnect Battery & Reassemble
Reconnect the battery connector and place the mid-frame back.
Ensure clips are secured and tighten all screws.
Step 11: Prepare Back Cover
Check if the adhesive is still good. If not, apply new adhesive.
Step 12: Final Assembly
Place the back cover and apply pressure using clips or rubber bands.
Leave it for some time to ensure proper bonding.
❓ FAQ (Frequently Asked Questions)
Q1: What does the main flex cable do?
It connects major components like the charging board and motherboard.
Q2: Is this repair beginner-friendly?
Yes, it’s one of the easier internal repairs.
Q3: Will this fix charging issues?
Yes, if the problem is caused by a damaged flex cable.
Q4: Do I need to remove the battery?
No, only disconnecting it is enough.
Q5: Can a damaged flex cause display issues?
Yes, it can affect display and touch functionality.
🔧 Troubleshooting (After The Repair)
Q1: Phone not charging after replacement?
Check if both ends of the flex cable are properly connected.
Q2: Device not turning on?
Ensure the battery connector is securely attached.
Q3: Loose connection issues remain?
Try reseating the flex cable again.
Q4: Back cover not sticking?
Apply fresh adhesive and use pressure for longer.
Q5: Display issues still present?
The issue may be related to the screen, not the flex cable.
✅ Final Thoughts
Replacing the main flex cable on the Samsung Galaxy A71 4G is a quick and effective way to resolve multiple internal connection issues. With minimal disassembly and basic tools, this is a great repair for beginners to try.
If you have any questions, feel free to ask.
Related Guides
