DIY Xiaomi Mi 11 Lite Charging Port Repair Guide

Before Starting, we need to have the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, take out the Sim tray, and then follow the back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the rear cover and remove the Logic board frame by undoing 11 screws. And then disconnect the battery plug on the left-hand side and sim connector plug on the right-hand side.

Next, move to the bottom part and undo four screws to take out the sim card flex. And then undo three more screws to take out the speaker buzzer module.

Next, disconnect the main ribbon flex.

Next, if needed, apply little heat to soften the glue on the charging board area. And then take out the not working charging port board by disconnecting the antenna head.

Next, place the new charging port board in the body.And then connect the antenna head and main flex into the board.

Next, place the speaker buzzer module by adding three screws.

Next, place and connect the sim card module by securing fours screws.and then add the sim card tray.

Next, connect the battery plus into the board.

Next, secure the Logic board frame by adding 11 screws.

Next, Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tightened the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the replacement guide. Let us know if you have any questions.