DIY Samsung Galaxy A03 Core Front & Rear Camera Repair Guide

To start, we need the right tools to proceed with the repair, which You can find in the description.

First, turn off the phone, take out the Sim tray, and follow the back cover removal.

To remove the back cover, create a gap near the sim slot or charger port using a picker or card pry tool. Insert the card pry tool and gently move around the phone to release the plastic clips on the frame.
Next, gently take out the back cover from the body.

Next, take out the board bracket by undoing eight screws.

Next, disconnect the battery plug.

First, disconnect and pull out the front camera from the board.

Next, pull out the not working rear camera from the board, for this needs to pull out the logic board.

First, disconnect both lcd plugs and the camera head; next, gently lift the logic board from the body.

Next, flip the logic board and pull out the camera module by disconnecting the plug.

Next, place and secure the new back camera to the body.

Next, secure the board to the body.

Next, secure both lcd connectors and antenna head to the board.

Next, secure the new front camera to the board.

Next, secure the battery plug.

Next, secure the board bracket by adding eight screws.

Finally, Snap in the back cover and run through the sides to secure the clips. And Also, add the sim tray.

I hope you have enjoyed the replacement guide on Galaxy A03 Core.

Let us know if you have any questions