DIY iPad mini 4 LCD Touch Screen Glass Repair Guide

Before starting we need to have the right tools to proceed to the repair which you can find in the description.

Proper heating requires wi-fi screen removal from the body for this we use a heating pad designed for tablets and mobile phones.On ipad devices make sure to hit the front side select the tablet heating option and leave it till the heating completes Alternatively you can use a heat gun or something similar

Once the heating has completed, use a suction cup on the sides to lift the front screen in between, insert few plastic pickers or cartridge tools and cut the adhesive around.be gentle while pulling the reflex cables attached to the logic board

Next lift the lcd screen to 45 degrees from the top and then remove the shield by undoing four screws and then disconnect both lcd and touch connector plugs and the battery plug

Now the lcd unit can leave from the body for the replacement part we are using lcd assembly unit with the sleep chip

Next test the new screen by connecting all three plugsOnce the testing has passed disconnect all three connector plugs

Next take out the camera holder from the broken screen by apparently heat and then place it on the new screen with adhesive

Next take out the home button assembly and the bracket from the broken screen, and then place it on the new screen by adding adhesive.be gentle and apply the heat and take out the flex by disconnecting the plug

Next place the new lcd and touch assembly unit in the body by securing three connector plugs. make sure the connections are secured and then add the shield by inserting four screws

Next, before clamping verify the screen functionality and then secure the screen to the body by adding adhesive. if your replacement part come without adhesive you could use b7000 glue or new double sided adhesive

Next we are using screen binding clips to tie the lcd screen to the frame. if not you can use some rubber bands and leave them for some time.