Now Reading: Motorola Moto One 5G ACE Camera Lens Glass & Back Cover Replacement Guide | DIY Repair
-
01
Motorola Moto One 5G ACE Camera Lens Glass & Back Cover Replacement Guide | DIY Repair
Motorola Moto One 5G ACE Camera Lens Glass & Back Cover Replacement Guide | DIY Repair
Welcome back to Geardo. In this repair guide, we will show you how to replace the camera lens glass and back cover on the Motorola Moto One 5G Ace smartphone.
If your camera lens glass is cracked, scratched, blurry, or damaged, replacing it can restore camera clarity and protect the rear camera module from dust and moisture. Replacing a damaged back cover can also improve the appearance and structural protection of the phone.
This beginner-friendly Google index repair guide includes detailed step-by-step instructions, repair difficulty, required tools, estimated repair time, troubleshooting tips, and FAQs to help you safely complete the repair at home.
Before starting the repair, make sure you have the correct replacement camera lens glass, back cover adhesive, and proper repair tools.
Repair Information
| Repair Detail | Information |
|---|---|
| Device Type | Smartphone |
| Device Model | Motorola Moto One 5G Ace |
| Repair Type | Camera Lens Glass & Back Cover Replacement |
| Repair Difficulty | ⭐⭐⭐⭐☆ |
| Estimated Repair Time | 450–60 Minutes |
Reasons for Camera Lens Glass & Back Cover Replacement
You may need this repair if your Motorola Moto One 5G Ace has any of the following issues:
- Cracked or shattered camera lens glass
- Blurry rear camera photos
- Dust entering the camera module
- Scratched camera lens affecting image quality
- Broken or damaged back cover
- Loose or lifted rear cover
- Cosmetic damage on the back housing
Replacing the camera lens glass and back cover helps restore camera performance, protects internal components, and improves the phone’s appearance.
Check The Latest Motorola Phones are in Clearance “up to 60% off” – https://amzn.to/480ho0w
Before You Begin
Compatibility and Model Numbers
- Motorola Moto One 5G Ace
- Motorola Moto One 5G
Model Numbers | XT2113-2, XT2113-5
Tools Required
- Mobile phone heating pad or hairdryer/heat gun
- Plastic pry tool / card pry
- Suction cups
- Phillips #00/#000 screwdrivers
- Torx T3 / T4 / T5 Screwdriver (Depends on the version)
- Flathead Screwdriver
- Tweezers (for connectors)
- B7000 glue or double-sided adhesive (for back cover)
- Rubber bands or bonding clips to secure the back cover
Using proper tools reduces the risk of damaging the phone.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/4nBrXMC
- Screen – https://amzn.to/46cWGtR
- Other Parts – https://amzn.to/4nFxjqp
- Silicone Work Repair Mat https://amzn.to/45Emz5l
How to Replace Motorola Moto One 5G Ace Camera Lens Glass & Back Cover
Step 1 – Power Off the Phone
Turn off the Motorola Moto One 5G Ace completely before beginning the repair.
Remove the SIM tray from the device.
Step 2 – Heat the Back Cover
The back cover is secured with adhesive.
Gently heat around the edges of the back cover until the adhesive becomes soft.
You can use a heating pad, heat gun, or hair dryer for this step.
Avoid overheating the phone.
Step 3 – Remove the Back Cover
Use a suction cup to create a small opening between the back cover and frame.
Insert a plastic card pry tool into the gap and carefully cut through the adhesive around the edges.
Apply additional heat if the adhesive becomes difficult to separate.
Step 4 – Disconnect the Fingerprint Sensor
Apply gentle heat around the fingerprint sensor area to soften the glue.
Carefully lift the back cover while guiding the fingerprint sensor through the frame.
Be careful not to damage the fingerprint sensor flex cable.
Step 5 – Remove the Board Frame
Remove the ten screws securing the board frame.
Carefully lift and remove the frame from the device.
Keep the screws organized for reassembly.
Step 6 – Remove the Damaged Camera Lens Glass
Apply heat around the camera lens glass using a heat gun or hair dryer to soften the adhesive.
From the rear side, gently apply slight pressure to remove the damaged lens glass.
Take your time during this step to avoid damaging the rear camera module.
Clean any remaining adhesive or broken glass pieces before installing the new lens.
Step 7 – Install the New Camera Lens Glass
Place the new camera lens glass onto the frame using fresh adhesive.
Ensure the lens sits correctly and aligns properly with the camera opening.
Press gently to secure it in place.
Step 8 – Reinstall the Board Frame
Place the board frame back onto the device.
Reinstall and tighten all ten screws securely.
Ensure the fingerprint sensor is correctly positioned before continuing.
Step 9 – Reattach the Back Cover
Before reinstalling the back cover, check whether enough adhesive remains around the edges.
If needed, apply B7000 glue or install new double-sided adhesive tape.
Press the back cover firmly into place.
Use bonding clips or rubber bands to hold the rear cover tightly while the adhesive cures.
Leave the device secured for some time for the best seal.
Frequently Asked Questions (FAQ)
Why are my Motorola Moto One 5G Ace photos blurry?
Blurry photos can happen if the camera lens glass is cracked, scratched, dirty, or damaged.
Can I replace only the camera lens glass without replacing the camera module?
Yes. If the rear camera itself still works properly, you can replace only the outer camera lens glass.
Is this repair beginner-friendly?
Yes. This repair is considered medium difficulty and can be completed at home with proper tools and patience.
Do I need glue for the back cover?
Yes. If the original adhesive is weak or damaged, use B7000 glue or replacement adhesive tape.
Will replacing the camera lens improve photo quality?
Yes. A new camera lens glass can restore image clarity and protect the rear camera from dust and debris.
Troubleshooting After Camera Lens Glass Replacement
Camera photos are still blurry after replacement
Check whether protective plastic film remains on the new camera lens glass.
Also clean fingerprints or dust from the lens area.
Dust appears inside the camera lens
The lens may not be sealed properly.
Remove the lens carefully, clean the area, and reinstall it with proper adhesive.
Fingerprint sensor is not working
Ensure the fingerprint flex cable is properly aligned and secured during reassembly.
Back cover does not stick properly
Apply fresh adhesive or B7000 glue and secure the device using bonding clips or rubber bands until fully cured.
Camera lens glass feels loose
Remove the lens and apply additional adhesive evenly around the frame before reinstalling it.
Final Words
The Motorola Moto One 5G Ace camera lens glass and back cover replacement is an effective repair that can restore your phone’s appearance and improve camera quality.
By carefully following this beginner-friendly repair guide, you can safely complete the repair at home using basic repair tools.
Take your time during the repair process, especially while removing the back cover and camera lens glass, to avoid damaging nearby components.
If you found this repair guide helpful, feel free to share it and let us know if you have any questions about the repair process.
Related Guides
Check Other Motorola Moto One 5G Ace Repair Guides
