Xiaomi Redmi Note 10 Power Volume Flex Cable Replacement | Note 10s

If your Xiaomi Redmi Note 10 or Redmi Note 10S power button or volume buttons are not working properly, the power and volume flex cable may need to be replaced. Problems such as an unresponsive power button, volume buttons that do not respond consistently, or damaged button functionality can be reasons to investigate the power and volume flex.

In this guide, we show you how to replace the power and volume flex cable on the Xiaomi Redmi Note 10 and Redmi Note 10S. The repair involves opening the phone, removing the back cover, camera lens frame, midframe, and logic board, replacing the non-working power and volume flex, and then reassembling the device.

The same repair procedure shown in this guide applies to both the Redmi Note 10 and Redmi Note 10S.

Repair Information

Information	Details
Devices	Xiaomi Redmi Note 10 / Redmi Note 10S
Repair Type	Power and Volume Flex Cable Replacement
Repair Difficulty	★★★★☆
Estimated Time	40–50 minutes

Reasons for the Repair

You may need to replace the power and volume flex if you notice:

• The power button does not respond consistently.
• The volume buttons do not work properly.
• One or more physical buttons have stopped responding.
• The power or volume controls work intermittently.
• The power and volume button flex is damaged and needs replacement.

These symptoms can have other possible causes, so they do not necessarily confirm that the flex cable itself is faulty.

---

---

Before You Begin

Compatibility and Model Numbers

• Redmi Note 10  
• Redmi Note 10s

Model Numbers : M2101K7AI, M2101K7AG, M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL

Battery Model BN59

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Torx (T2/T3/T4) screwdrivers
• Flathead screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery –  https://amzn.to/4nnTu3U
  • Screen – https://amzn.to/3WPEvEP
  • Other Parts – https://amzn.to/3JqYKWm
• Silicone Work Repair Mat https://amzn.to/45Emz5l

Step-by-Step Power and Volume Flex Replacement

Step 1: Open the Phone

Begin by preparing the Xiaomi Redmi Note 10 or Redmi Note 10S for disassembly.

The phone needs to be opened before the internal components can be accessed.

Step 2: Remove the Back Cover

Carefully remove the rear back cover from the phone.

Work around the edges carefully when separating the cover from the body.

Step 3: Remove the Camera Lens Frame

Next, remove the camera lens frame to access the components underneath.

Step 4: Remove the Midframe

Remove the midframe from the phone.

Carefully separate the frame from the body so that the internal components are not damaged.

Step 5: Remove the Logic Board

Next, remove the logic board from the phone.

Carefully remove the board to access the power and volume flex cable.

Step 6: Remove the Non-Working Power and Volume Flex

Remove the non-working power and volume flex from the phone.

Carefully release the existing flex before installing the replacement.

Step 7: Install the New Power and Volume Flex

Place the new power and volume flex into position.

Make sure the replacement flex is correctly positioned before continuing with the reassembly.

Step 8: Reinstall the Logic Board

Place the logic board back into the phone.

Make sure it is properly positioned before continuing with the reassembly.

Step 9: Reinstall the Midframe

Place the midframe back into position.

Make sure it is properly seated before continuing.

Step 10: Reinstall the Camera Lens Frame

Place the camera lens frame back into position.

Step 11: Close the Phone and Install the Back Cover

Finally, close the phone and reinstall the back cover.

Make sure the back cover is properly positioned and secured to complete the repair.

FAQ

Why are the power or volume buttons not working on my Redmi Note 10?

An unresponsive or inconsistent power or volume button can have several possible causes. A damaged power and volume flex is one possible cause that may require replacement.

Why does my Redmi Note 10 power button work intermittently?

Intermittent button operation can be a reason to investigate the power and volume flex, although the symptom alone does not confirm that the flex is faulty.

How do I know if the power and volume flex needs replacement?

If the physical power or volume controls are consistently or intermittently unresponsive, the flex may need to be investigated. Other hardware or software issues can also cause button problems.

Is this power and volume flex replacement guide compatible with the Redmi Note 10S?

Yes. The repair procedure shown in this guide applies to both the Xiaomi Redmi Note 10 and Redmi Note 10S.

What needs to be removed to access the power and volume flex?

The repair procedure involves removing the back cover, camera lens frame, midframe, and logic board before the non-working power and volume flex is removed.

What is reinstalled after replacing the power and volume flex?

After installing the new flex, the logic board, midframe, camera lens frame, and back cover are reinstalled.

Troubleshooting

The power button still does not work after replacing the flex.

If the power button remains unresponsive after the replacement, the flex may not be the only possible cause. Other hardware or connection issues may need to be investigated.

The volume buttons still do not work after the replacement.

Check that the replacement power and volume flex has been correctly positioned during the repair. If the problem remains, another issue may be affecting the button functionality.

The logic board does not sit correctly during reassembly.

Make sure the replacement flex and other internal components are correctly positioned before reinstalling the logic board.

The buttons work intermittently after the repair.

Check that the replacement flex has been correctly installed. If intermittent operation continues, the cause may be something other than the flex itself.

The back cover is not staying securely attached.

Check that the rear cover is correctly positioned and that its adhesive is suitable for securing it to the phone body.

Conclusion

Replacing the power and volume flex can help restore button functionality when the original flex is damaged or no longer working correctly.

This guide covers the power and volume flex replacement procedure for both the Xiaomi Redmi Note 10 and Redmi Note 10S, from opening the phone and removing the necessary components to installing the replacement flex and reassembling the device.

Related Guides

View Other Xiaomi Redmi Note 10 Repair Guides

Check Poco F3 Repair Guides

Check Redmi 10 Repair Guides