Samsung Galaxy A52 5g Speaker Replacement Guide | DIY Repair

If your Samsung Galaxy A52 5G ringer speaker is not producing sound, sounds distorted, or is very low during incoming calls and notifications, replacing the ringer (loudspeaker) module can restore full audio performance.

This detailed step-by-step DIY repair guide will walk you through replacing the ringer speaker module on the Samsung Galaxy A52 5G safely and correctly.

---

Repair Difficulty

Device Type: Smartphone
Type of Repair: Ringer Speaker (Loudspeaker) Replacement

Repair Difficulty: ⭐⭐⭐☆☆ (Moderate)
Estimated Time: 30–45 Minutes

---

Reasons for Ringer Speaker Replacement

• No ringtone sound
• Very low loudspeaker volume
• Distorted or crackling sound
• No media sound from bottom speaker
• Notification sounds not working
• Speaker damaged after liquid exposure

If calls are working but loudspeaker audio is faulty, replacing the ringer speaker module usually fixes the issue.

---

Before You Begin

Compatibility and Model Numbers

• Samsung Galaxy A52 5G
• Samsung Galaxy A52
• Samsung Galaxy A52s 5G

This repair guide based on Samsung Galaxy A52 5G Model.

Model Numbers | SM-A525F, SM-A525F/DS, SM-A525M, SM-A525M/DS, SM-A526B, SM-A526B/DS, SM-A5260, SM-A526W, SM-A526U, SM-A526U1, SM-A528B, SM-A528B/DS, SM-A528N

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Phillips #00/#000 screwdrivers
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

Using proper tools reduces the risk of damaging the phone.

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/4fSiTAz
  • Screen – https://amzn.to/45RzEY3
  • Other Parts – https://amzn.to/3HrvhuG
• Silicone Work Repair Mat https://amzn.to/45Emz5l

---

Step-by-Step Samsung Galaxy A52 5G Ringer Speaker Replacement

Step 1: Power Off and Remove SIM Tray

Turn off the device completely.
Remove the SIM tray using a SIM ejector tool.

---

Step 2: Heat and Remove the Back Cover

The back cover is secured with adhesive.

• Gently heat around the rear cover edges using a heating pad.
• Alternatively, use a heat gun or hairdryer evenly around the edges.
• Use a suction cup to create a small opening.
• Insert a plastic card or pry tool to cut through the adhesive.

Carefully remove the back cover.

---

Step 3: Remove the Mid Frame

• Unscrew the screws securing the mid frame.
• Use a pry tool to carefully lift and remove the mid frame assembly.

Set it aside safely.

---

Step 4: Remove the Ringer Speaker Cover

• Locate the ringer (loudspeaker) module at the bottom section.
• Remove the screws securing the ringer cover.
• Lift and remove the speaker module carefully.

---

Step 5: Install the New Ringer Speaker

• Place the new ringer speaker module into position.
• Ensure proper alignment with contact points.
• Secure it using the screws.

---

Step 6: Reinstall the Mid Frame

• Position the mid frame back onto the device.
• Secure it with screws properly.

---

Step 7: Seal and Install the Back Cover

• Check if the back cover has sufficient adhesive.
• If needed, apply B7000 glue or new double-sided adhesive.
• Align and press the back cover firmly.
• Use bonding clips or rubber bands to secure it.
• Leave it for proper bonding time.

---

FAQ – Samsung Galaxy A52 5G Ringer Speaker Repair

Q1: How do I know if my ringer speaker is damaged?

If ringtone, notifications, or media sounds are not audible from the bottom speaker, the ringer speaker may be faulty.

Q2: Does this repair affect microphone or earpiece?

No. The ringer speaker is separate from the microphone and earpiece.

Q3: Can software cause no speaker sound?

Yes. Always check volume settings and perform a restart before replacing hardware.

Q4: Will this repair erase my data?

No. Speaker replacement does not affect internal storage.

Q5: Is heating mandatory?

Yes, heating is required to safely remove the back cover without damage.

---

Troubleshooting After Replacement

Q1: No sound after replacing the speaker.

Check if:

• The speaker contacts are aligned properly.
• The mid frame is secured tightly.
• Volume settings are adjusted correctly.

Q2: Sound is still distorted.

Ensure the replacement speaker is original and compatible with the Galaxy A52 5G.

Q3: Back cover is not sticking properly.

Apply fresh adhesive and secure with clips for at least 30–60 minutes.

Q4: Phone does not power on after repair.

Check if any connectors were accidentally loosened during mid frame removal.

---

Conclusion

Replacing the ringer speaker on the Samsung Galaxy A52 5G is a moderate-level repair that can restore full audio performance. By following this guide carefully and using proper tools, you can fix speaker issues and extend your device’s usability.

Other Guides

• More Samsung Galaxy A52 5G Repair Guides
• Samsung Galaxy A15 5G Repair Guides