DIY Xiaomi Mi 11 Lite Camera Back | Front Repair Guide

Before Starting, we need to have the right tools to proceed with the repair , which You can find in the description.

First, turn off the phone, take out the Sim tray, and then follow the back cover removal.

To remove the back cover, it needs to heat gently around the rear cover edges until the pasted adhesive becomes soft.

For this, we are using a heating pad. Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave it till it completes. Alternatively, you can use a heat gun or hairdryer.

Once the heating has completed, Use a suction cup to create an opening between the frame and rear cover. Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.

Take out the rear cover and remove the Logic board frame by undoing 11 screws. And then disconnect the battery plug on the left-hand side.

Next, take out the not working front camera and all three rear cameras from the logic board.

Next, Replaced the required broken camera with a new unit and placed it on the logic board.

Make sure the connections are secured.

Next, secure the Logic board frame by adding 11 screws and the sim tray.

Next, Before installing the main back cover, make sure it has enough glue on it; if not, use B7000 glue or a new double-sided back cover adhesive.

Finally, we are adding bonding clips to tightened the rear cover with the body. If not, you can use some rubber bands and Leave them for some time.

I hope you have enjoyed the camera replacement guide. Let us know if you have any questions.