Google Pixel 5 LCD Screen Replacement Guide

Replacing the LCD screen on a Google Pixel 5 requires careful handling of the display adhesive and the screen flex connector. This repair also involves transferring the earpiece from the damaged screen to the replacement display before testing and installation. In this guide, we’ll cover how to open the Google Pixel 5, remove the broken LCD, transfer the earpiece, test the new screen, and securely install it.

Repair Information

Repair Information	Details
Device	Google Pixel 5
Repair Type	LCD Screen Replacement
Repair Difficulty	★★★☆☆
Estimated Time	Approximately 1 hour

Reasons for the Repair

You may need to replace the Google Pixel 5 LCD screen if you experience:

• A cracked or broken display
• Physical damage to the screen
• Display problems caused by a damaged LCD
• A screen that needs replacement after accidental damage

Important: Take extra care when separating the display from the phone. The LCD flex connector is located on the left-hand side, and using excessive force or inserting a pry tool too deeply can cause internal damage.

---

Before You Begin

Compatibility and Model Numbers

This repair guide based on Google Pixel 5

Model Numbers | GD1YQ, GTT9Q, G5NZ6

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Torx T3 screwdriver
• Torx T4 screwdriver
• Torx T5 screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heat Mat / Heating Pad – https://amzn.to/3H0tHzJ
• Best Portable Heat Gun – https://amzn.to/4cZYnhL
• Clamps – https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit – https://amzn.to/3UO1jUx
• Stronger Suction Cup – https://amzn.to/3UVb6YR
• Silicone Work Repair Mat – https://amzn.to/4euW6fs
• Must Have Glue | Adhesive – https://amzn.to/4uxhKog
• Compatible Parts –
  • Battery – https://amzn.to/3JEaxAO
  • Screen – https://amzn.to/4oiq0p7
  • Other Parts – https://amzn.to/4hCRy6a

Step 1: Open the Google Pixel 5

Begin by opening the Google Pixel 5 so you can access the LCD screen and its connector.

The front display is secured to the phone with adhesive, so the screen needs to be carefully separated from the body before it can be removed.

---

Step 2: Remove the Broken LCD Screen

Gently heat around the edges of the screen to soften the adhesive.

A heating pad can be used for this process. Place the front of the phone on the heating pad and select the mobile phone heating option. Alternatively, a heat gun or hairdryer can be used to gently warm the display edges.

Once the adhesive has softened, use a suction cup to lift the screen slightly.

Insert a plastic card pry tool into the opening and carefully cut through the adhesive around the LCD.

Work slowly and avoid inserting the pry tool too deeply. The LCD flex connector is located on the left-hand side of the screen.

Once the adhesive has been released, gradually lift the display from the right-hand side toward the left-hand side, keeping it positioned like an open book.

---

Step 3: Disconnect the LCD Connector

With the screen lifted, use a tweezer to remove the LCD connector bracket.

Next, disconnect the LCD connector plug from the board.

Once the connector is disconnected, the broken LCD screen can be removed completely from the phone.

Clean the frame edges before installing the replacement screen.

---

Step 4: Remove the Earpiece

The earpiece module needs to be transferred from the broken LCD to the replacement screen.

Apply some gentle heat around the earpiece to soften the adhesive holding it in place.

Once the adhesive has softened, carefully remove the earpiece module from the broken screen.

Handle the module gently so it can be reused on the new LCD.

---

Step 5: Install the Earpiece on the New LCD

Take the replacement Google Pixel 5 LCD screen and position the earpiece module in its correct location.

Secure the earpiece to the new screen using adhesive.

Make sure the module is positioned correctly before continuing with the repair.

---

Step 6: Test the New LCD Screen

Before permanently securing the replacement LCD, connect it to the Google Pixel 5 for testing.

Reconnect the LCD connector and check that the replacement display is functioning correctly.

Testing the screen before final installation helps confirm that the replacement LCD is working properly.

Once the testing has passed, continue with the installation.

---

Step 7: Install the New LCD Screen

Before permanently securing the display, make sure the screen has sufficient adhesive.

B7000 glue or new double-sided LCD adhesive can be used for the installation. In this repair, B7000 glue is used.

Reconnect the LCD connector and carefully position the replacement screen on the phone.

Gently slide the screen into position, starting from the left-hand side and then moving toward the right.

Apply slight pressure around the screen edges so the adhesive can bond the LCD to the phone body.

---

Step 8: Secure the LCD Connector Bracket

Once the replacement screen is correctly positioned, secure the LCD connector and reinstall the connector bracket.

Make sure the connector is properly seated before securing the bracket.

---

Step 9: Close and Complete the Installation

With the LCD installed and the connector bracket secured, press the screen edges gently to ensure the display is properly attached to the phone body.

Bonding clips can be used to hold the LCD firmly in place while the adhesive sets. If bonding clips are not available, rubber bands can be used to provide pressure around the screen.

Allow the adhesive enough time to bond before removing the clips or rubber bands.

---

End of Repair Guide

The Google Pixel 5 LCD screen replacement is now complete. Allow the adhesive to set properly, then verify that the new display is functioning correctly and that the screen is securely attached to the phone.

---

FAQ

Do I need to remove the earpiece from the broken LCD?

Yes. The earpiece is transferred from the broken screen to the replacement Google Pixel 5 LCD.

Should I test the replacement LCD before installing it permanently?

Yes. The replacement screen should be connected and tested before it is permanently secured with adhesive.

What adhesive can I use to secure the new LCD?

B7000 glue or new double-sided LCD adhesive can be used. This repair uses B7000 glue.

Which side should I lift the Google Pixel 5 screen from?

The screen is gradually lifted from the right-hand side toward the left-hand side. Take particular care around the left side because the LCD flex connector is located there.

How can I hold the screen in place while the adhesive sets?

Bonding clips can be used to secure the screen while the adhesive sets. Rubber bands can also be used as an alternative.

---

Troubleshooting

What should I do if the replacement LCD does not work during testing?

Check that the LCD connector is properly connected before proceeding with the permanent installation. The display should be tested before applying the final adhesive.

What if the old LCD is difficult to separate?

Apply gentle heat around the screen edges to soften the adhesive further. Avoid forcing the pry tool or inserting it too deeply.

What if the new screen does not sit properly on the phone?

Check the screen alignment and make sure the frame edges are clean. Reposition the display carefully before the adhesive sets.

What if the screen lifts after installation?

Use bonding clips or rubber bands to keep pressure on the screen while the adhesive sets. Allow sufficient time for the adhesive to bond before removing them.

Related Guides

Pixel 4A 5G Battery Change Guide

Pixel 6A Battery Replacement guide

More Pixel 5 Repair Guides