Google Pixel 5 Microphone Replacement Guide

A faulty microphone can make it difficult for others to hear you clearly during calls or when recording audio. Replacing the microphone on the Google Pixel 5 requires removing the display, board bracket, battery, rear camera module, and logic board to access the microphone.

In this guide, we’ll cover the complete Google Pixel 5 microphone replacement process, including removing the damaged microphone, installing the replacement, testing it, and reassembling the phone.

Repair Information

Repair Information	Details
Device	Google Pixel 5
Repair Type	Microphone Replacement
Repair Difficulty	★★★★☆
Estimated Time	Approximately 1–2 hours

Reasons for the Repair

You may need to replace the Google Pixel 5 microphone if you experience:

• Other people cannot hear you clearly during calls
• The microphone is not working
• Voice recordings are not captured correctly
• Microphone-related audio problems
• The microphone has been damaged and needs replacement

Important: Work carefully when opening the Pixel 5 and handling the internal components. Avoid using excessive force around connectors, flex cables, and the logic board.

---

Before You Begin

Compatibility and Model Numbers

This repair guide based on Google Pixel 5

Model Numbers | GD1YQ, GTT9Q, G5NZ6

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Torx T3 screwdriver
• Torx T4 screwdriver
• Torx T5 screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heat Mat / Heating Pad – https://amzn.to/3H0tHzJ
• Best Portable Heat Gun – https://amzn.to/4cZYnhL
• Clamps – https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit – https://amzn.to/3UO1jUx
• Stronger Suction Cup – https://amzn.to/3UVb6YR
• Silicone Work Repair Mat – https://amzn.to/4euW6fs
• Must Have Glue | Adhesive – https://amzn.to/4uxhKog
• Compatible Parts –
  • Battery – https://amzn.to/3JEaxAO
  • Screen – https://amzn.to/4oiq0p7
  • Other Parts – https://amzn.to/4hCRy6a

Step 1: Open the Google Pixel 5

Begin by opening the Google Pixel 5 to access the internal components.

The LCD screen must be removed first because it covers the components that need to be accessed during the microphone replacement.

---

Step 2: Remove the Broken LCD Screen

Gently heat around the edges of the LCD screen to soften the adhesive.

A heating pad can be used for this process. Place the front of the phone on the heating pad, select the mobile phone heating option, and allow it to heat the display.

Alternatively, a heat gun or hairdryer can be used.

Once the adhesive has softened, use a suction cup to lift the screen slightly.

Insert a plastic card pry tool into the opening and carefully cut through the adhesive around the LCD.

Work gently and avoid inserting the pry tool too deeply. The LCD flex connector is located on the left-hand side of the screen.

Gradually lift the display from the right-hand side toward the left-hand side and keep it positioned like an open book.

---

Step 3: Disconnect the LCD Connector

Use a tweezer to remove the LCD connector bracket.

Next, disconnect the LCD connector plug from the board.

Once the connector has been disconnected, the LCD screen can be completely separated from the phone.

Clean the frame edges before continuing with the internal repair.

---

Step 4: Remove the Board Bracket

Remove the board bracket to gain access to the internal components.

The board bracket needs to be taken out carefully so the battery, camera module, logic board, and microphone can be accessed.

Keep the removed screws organized for reassembly.

---

Step 5: Remove the Battery

Disconnect the battery connection before continuing with the repair.

Carefully remove the battery from the phone so the logic board and other internal components can be accessed.

Handle the battery carefully throughout the repair.

---

Step 6: Remove the Rear Camera Module

Next, remove the rear camera module.

Disconnect the camera connections from the board and carefully remove the rear camera module from the phone.

Set the camera module aside in a safe location while working on the microphone.

---

Step 7: Remove the Logic Board

The logic board must now be removed to access the faulty microphone.

Disconnect the required connector plugs from the logic board.

Remove the screws securing the logic board and carefully lift the board out of the phone.

Handle the logic board gently and avoid putting unnecessary pressure on its components or connectors.

---

Step 8: Remove the Faulty Microphone

With the logic board removed, the non-working Google Pixel 5 microphone can be accessed.

Carefully remove the faulty microphone from the board.

Take care during this step to avoid damaging the surrounding components.

---

Step 9: Install the New Microphone

Position the replacement Google Pixel 5 microphone in the correct location.

Secure the new microphone in place, making sure it is positioned correctly before continuing with the reassembly.

---

Step 10: Reinstall the Logic Board

Place the logic board back into the phone.

Carefully position the board and make sure it sits correctly in the body.

Reconnect the required connector plugs and secure the logic board with its screws.

Take care not to damage any of the flex cables while positioning the board.

---

Step 11: Reinstall the Rear Camera Module

Place the rear camera module back into its position.

Reconnect the camera connections and make sure the module is properly seated.

Secure the camera module as required before continuing.

---

Step 12: Reinstall the Battery

Place the battery back into the phone.

Reconnect the battery connection and make sure it is properly seated before continuing with the reassembly.

---

Step 13: Reinstall the Board Bracket

Place the board bracket back into position.

Secure the bracket with its screws, making sure everything is correctly aligned before continuing.

---

Step 14: Test the New Microphone

Before permanently installing the LCD screen, test the phone and verify that the replacement microphone is working correctly.

Testing at this stage allows you to confirm the repair before sealing the display back onto the phone.

Once the testing has passed, continue with the LCD installation.

---

Step 15: Install the LCD Screen

Before securing the LCD screen, make sure the frame edges are clean and there is enough adhesive available.

B7000 glue or new double-sided LCD adhesive can be used to secure the screen. In this repair, B7000 glue is used.

Carefully position the replacement LCD screen on the phone.

Gently slide the display into position and apply slight pressure around the screen edges so the adhesive can bond properly.

---

Step 16: Reconnect the LCD and Bracket

Reconnect the LCD connector to the board.

Once the connector is properly connected, install the LCD connector bracket to secure the connection.

Check that the display is positioned correctly before continuing.

---

Step 17: Close the Phone and Install the Back Cover

With the LCD connector and bracket secured, complete the final phone assembly.

Make sure the screen is firmly attached to the body. Bonding clips can be used to hold the LCD in place while the adhesive sets. Rubber bands can also be used if bonding clips are not available.

Finally, complete the back cover installation.

Allow the adhesive enough time to set before returning the phone to regular use.

---

End of Repair Guide

The Google Pixel 5 microphone replacement is now complete. After the adhesive has set, verify that the microphone works correctly by making a call or recording audio and confirming that the microphone captures sound properly.

---

FAQ

What components need to be removed to access the Pixel 5 microphone?

The repair requires removing the LCD screen, LCD connector bracket, board bracket, battery, rear camera module, and logic board before accessing the microphone.

Should I test the microphone before reinstalling the LCD?

Yes. The microphone is tested before the LCD screen is permanently installed so the repair can be verified before closing the phone.

Why does the LCD screen need to be removed?

The display covers the internal components that must be accessed during the microphone replacement, so it needs to be separated before the internal repair can begin.

Can I use B7000 glue when reinstalling the LCD?

Yes. B7000 glue can be used to secure the LCD screen. New double-sided LCD adhesive is another option.

Do I need to remove the rear camera module?

Yes. The rear camera module is removed as part of the process to gain access to the logic board and microphone.

---

Troubleshooting

What should I do if the replacement microphone does not work during testing?

Check the microphone installation and the connections that were reconnected during reassembly before permanently securing the LCD screen.

What if the LCD screen is difficult to remove?

Apply additional gentle heat around the screen edges to soften the adhesive. Avoid forcing the pry tool or inserting it too deeply.

What if the LCD connector does not sit correctly?

Check the connector alignment and make sure it is properly seated before installing the connector bracket.

What if the phone does not work correctly after reassembly?

Before closing the phone completely, check the connections that were disconnected during the repair, including the battery, camera, logic board, and LCD connections.

---

Related Guides

Pixel 6A Battery Replacement guide

More Pixel 5 Repair Guides