Google Pixel 5 Ringer Replacement Guide | Fix Sound Problems

A faulty ringer can prevent the Google Pixel 5 from producing sound correctly for incoming calls and other alerts. Replacing the ringer requires opening the phone and removing several internal components to reach it.

In this guide, we’ll cover how to remove the LCD screen, board bracket, battery, rear camera module, and logic board, replace the faulty ringer, test the repair, and reassemble the Google Pixel 5.

Repair Information

Repair Information	Details
Device	Google Pixel 5
Repair Type	Ringer Replacement
Repair Difficulty	★★★★☆
Estimated Time	Approximately 1–2 hours

Reasons for the Repair

You may need to replace the Google Pixel 5 ringer if you experience:

• No sound from the ringer
• Incoming call alerts not producing sound
• Ringer-related audio problems
• A damaged or non-working ringer
• Problems with normal alert sounds

Important: Work carefully when opening the Pixel 5 and handling its internal components. Avoid excessive force around connectors, flex cables, the battery, and logic board.

Before You Begin

Compatibility and Model Numbers

This repair guide based on Google Pixel 5

Model Numbers | GD1YQ, GTT9Q, G5NZ6

Tools Required

• Mobile phone heating pad or hairdryer/heat gun
• Plastic pry tool / card pry
• Suction cups
• Torx T3 screwdriver
• Torx T4 screwdriver
• Torx T5 screwdriver
• Tweezers (for connectors)
• B7000 glue or double-sided adhesive (for back cover)
• Rubber bands or bonding clips to secure the back cover

How to Find Tools and Parts

• Heat Mat / Heating Pad – https://amzn.to/3H0tHzJ
• Best Portable Heat Gun – https://amzn.to/4cZYnhL
• Clamps – https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit – https://amzn.to/3UO1jUx
• Stronger Suction Cup – https://amzn.to/3UVb6YR
• Silicone Work Repair Mat – https://amzn.to/4euW6fs
• Must Have Glue | Adhesive – https://amzn.to/4uxhKog
• Compatible Parts –
  • Battery – https://amzn.to/3JEaxAO
  • Screen – https://amzn.to/4oiq0p7
  • Other Parts – https://amzn.to/4hCRy6a

Step 1: Open the Google Pixel 5

Begin by opening the Google Pixel 5 to access the internal components.

The LCD screen needs to be removed first because it covers the internal components required for this repair.

---

Step 2: Remove the Broken LCD Screen

Gently heat around the edges of the LCD screen to soften the adhesive.

A heating pad can be used for this process. Place the front of the phone on the heating pad, select the mobile phone heating option, and allow the heating process to complete.

Alternatively, a heat gun or hairdryer can be used to gently warm the screen edges.

Once the adhesive has softened, use a suction cup to lift the screen slightly.

Insert a plastic card pry tool into the opening and carefully cut through the adhesive around the LCD.

Work slowly and avoid inserting the pry tool too deeply. The LCD flex connector is located on the left-hand side of the screen.

Gradually lift the screen from the right-hand side toward the left-hand side and keep it positioned like an open book.

---

Step 3: Disconnect the LCD Connector

Use a tweezer to remove the LCD connector bracket.

Next, disconnect the LCD connector plug from the board.

Once the connector is disconnected, the LCD screen can be completely separated from the phone.

Clean the frame edges before continuing with the internal repair.

---

Step 4: Remove the Board Bracket

Remove the board bracket to gain access to the internal components.

Carefully take out the bracket and keep the removed screws organized for reassembly.

---

Step 5: Remove the Battery

Disconnect the battery connection before continuing.

Carefully remove the battery from the phone so the remaining internal components can be accessed.

Handle the battery carefully throughout the repair.

---

Step 6: Remove the Rear Camera Module

Next, remove the rear camera module.

Disconnect the camera connections and carefully lift the rear camera module out of the phone.

Set the camera module aside safely while continuing with the ringer replacement.

---

Step 7: Remove the Logic Board

The logic board must now be removed to access the faulty ringer.

Disconnect the required connector plugs from the logic board.

Remove the screws securing the logic board and carefully lift the board out of the phone.

Handle the board gently and avoid putting unnecessary pressure on its components or connectors.

---

Step 8: Remove the Faulty Ringer

With the logic board removed, locate the non-working Google Pixel 5 ringer.

Carefully remove the faulty ringer from the phone.

Take care during removal to avoid damaging the surrounding components.

---

Step 9: Install the New Ringer

Position the replacement Google Pixel 5 ringer in the correct location.

Secure the new ringer in place and make sure it is correctly positioned before continuing with the reassembly.

---

Step 10: Reinstall the Logic Board

Place the logic board back into the phone.

Carefully position it in the body and reconnect the required connector plugs.

Secure the logic board with its screws, taking care around the flex cables and other internal components.

---

Step 11: Reinstall the Rear Camera Module

Place the rear camera module back into its position.

Reconnect the camera connections and make sure the module is properly seated.

Secure the camera module before continuing with the reassembly.

---

Step 12: Reinstall the Battery

Place the battery back into the phone.

Reconnect the battery connection and make sure it is properly seated.

---

Step 13: Reinstall the Board Bracket

Place the board bracket back into its original position.

Secure the bracket with its screws and make sure everything is correctly aligned.

---

Step 14: Test the New Ringer

Before permanently installing the LCD screen, test the phone and verify that the replacement ringer is working correctly.

Testing at this stage allows the repair to be confirmed before the display is permanently secured.

Once the testing has passed, continue with the LCD installation.

---

Step 15: Install the LCD Screen

Before securing the LCD, make sure the frame edges are clean and there is enough adhesive available.

B7000 glue or new double-sided LCD adhesive can be used to secure the screen. In this repair, B7000 glue is used.

Carefully position the LCD screen on the phone.

Gently slide the display into position and apply slight pressure around the screen edges so the adhesive can bond properly.

---

Step 16: Reconnect the LCD and Bracket

Reconnect the LCD connector to the board.

Once the connector is properly connected, install the LCD connector bracket to secure it.

Check that the display is positioned correctly before continuing.

---

Step 17: Close the Phone and Install the Back Cover

With the LCD connector and bracket secured, complete the final phone assembly.

Make sure the screen is firmly attached to the body. Bonding clips can be used to hold the LCD in place while the adhesive sets. Rubber bands can also be used if bonding clips are not available.

Finally, complete the back cover installation.

Allow the adhesive enough time to set before returning the phone to normal use.

---

End of Repair Guide

The Google Pixel 5 ringer replacement is now complete. Once the adhesive has set, verify that the ringer works correctly by testing the phone’s sound and alert functions.

---

FAQ

What components need to be removed to access the Pixel 5 ringer?

The repair requires removing the LCD screen, LCD connector bracket, board bracket, battery, rear camera module, and logic board before accessing the ringer.

Should I test the ringer before permanently installing the LCD?

Yes. Testing should be completed before the LCD is permanently secured so you can confirm that the replacement ringer is working.

Why does the logic board need to be removed?

The logic board needs to be removed as part of the repair sequence to access the non-working ringer.

What adhesive can be used to reinstall the LCD?

B7000 glue or new double-sided LCD adhesive can be used. The procedure uses B7000 glue.

How should the LCD be held while the adhesive sets?

Bonding clips can be used to hold the screen securely. Rubber bands can also be used to apply pressure while the adhesive sets.

---

Troubleshooting

What should I do if the new ringer does not work during testing?

Check the ringer installation and the connections that were reconnected during reassembly before permanently installing the LCD.

What if the LCD screen is difficult to remove?

Apply gentle heat around the screen edges to soften the adhesive further. Avoid forcing the pry tool or inserting it too deeply.

What if the LCD connector does not connect properly?

Check the connector alignment and make sure it is properly seated before installing the connector bracket.

What if the phone does not work correctly after reassembly?

Check the connections that were disconnected during the repair, including the battery, camera, logic board, and LCD connections, before completing the final installation.

---

Related Guides

Pixel 6A Battery Replacement guide

More Pixel 5 Repair Guides

Pixel 3 Battery Change Guide