Now Reading: iPad Mini 6 Front Camera Replacement Guide (2021)
-
01
iPad Mini 6 Front Camera Replacement Guide (2021)
Hi everyone, welcome back to DIYGeardo
Today, we’ll show you how to replace the front (selfie) camera on the iPad Mini 6 (2021). If your front camera is not working, producing blurry images, or showing a black screen during video calls, replacing the front camera module will restore normal functionality.
This guide explains the safe display removal process, how to access the front camera at the top center, and how to reinstall the screen securely after replacement.
Repair Difficulty
Difficulty Level: 🔧🔧🔧🔧☆ (Moderate to Hard)
Estimated Repair Time: 60–90 minutes
Repair Type: Front Camera Replacement
⚠️ The display is thin and firmly glued. Work slowly and apply heat evenly to avoid cracking the glass.
Before You Begin
Compatibility and Model Numbers
This repair guide based on iPad Mini 6th Generation 2021 Model
Also Compatible with iPad mini 7th Generation Model, Both Wifi and Cellular Edition models.
Model Numbers | iPad mini 6th Generation, iPad mini 7th Generation, A2568, A2993, A2995, A2996
Required Tools
- Heating pad / heat gun / hairdryer
- Suction cup
- Plastic card pry tools / opening picks/ Tweezers
- Phillips screwdriver #00 / #000
- Torx T3 Screwdriver
- Adhesive (B7000 or double-sided back cover adhesive)
- Bonding clips or rubber bands (optional but recommended)
Make sure the device is turned off and the SIM tray is removed (For Cellular Version) before starting.
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts –
- Battery – https://amzn.to/3HFBIKE
- LCD Screen – https://amzn.to/420pGST
- Other Parts – https://amzn.to/4fOsf04
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Important: Back up your data before starting. Work slowly and keep screws organized.
Reasons for Front Camera Replacement
You may need to replace the front camera if:
- Front camera shows a black screen
- Camera app crashes when switching to selfie mode
- Video calls are blurry or unfocused
- FaceTime or video apps cannot access the camera
- Front camera stops working after impact or liquid damage
Protect Your iPad Mini
- Tempered Glass For The Screen https://amzn.to/41mdEmI
- Best Cases For Your iPad https://amzn.to/45U2VRW
- Keypad for the iPad – https://amzn.to/3HNyJjg
Step-by-Step iPad Mini 6 Front Camera Replacement
Step 1: Heat the Display
To loosen the adhesive holding the display:
- Place the front side of the iPad on a heating pad.
- Select the tablet heating option and allow the cycle to complete.
- Alternatively, use a heat gun or hair dryer, heating evenly around the edges.
Step 2: Lift the Display
- Attach a suction cup to the side of the screen.
- Gently lift to create a small gap.
- Insert plastic pickers or card pry tools and carefully cut the adhesive.
⚠️ Be careful—flex cables are attached to the logic board.
Step 3: Open the Display
- Lift the LCD screen slowly from the bottom.
- Tilt the display to about 45 degrees.
- Once disconnected, the screen assembly can be removed from the body.
Step 4: Disconnect Battery & Display Cables
- Remove the metal shield by undoing five screws.
- Disconnect:
- Battery connector
- LCD connector
- Touchscreen connector
Step 5: Remove the Front Camera Bracket
- Move to the top-center area of the iPad.
- Remove the front camera bracket by undoing two screws.
Step 6: Remove the Faulty Front Camera
- Disconnect the front camera connector.
- Gently pry the flex cable and lift the camera using a tweezer or plastic pry tool.
- Remove the faulty front camera module.
Step 7: Install the New Front Camera
- Place the new front camera into position.
- Secure the camera connector firmly to the board.
Step 8: Reinstall the Camera Bracket
- Reinstall the front camera bracket.
- Secure it using two screws.
Step 9: Reconnect Display & Battery
- Reconnect the LCD and touch connectors.
- Secure the battery connector.
- Reinstall the metal shield using five screws.
Step 10: Test Before Sealing
Before sealing the display:
- Power on the iPad
- Test front camera functionality
- Check display and touch response
Step 11: Seal the Display
- Apply B7000 glue or double-sided adhesive around the frame.
- Slide the top edge first, then press the sides and bottom into place.
- Apply pressure only on the frame edges.
Step 12: Clamp the Display
- Use screen bonding clips to secure the display.
- Alternatively, use rubber bands.
- Leave clamped for enough time to ensure proper bonding.
Frequently Asked Questions (FAQ)
Q: Is the front camera soldered to the board?
A: No. The front camera is connected via a flex cable and can be replaced easily.
Q: Can I reuse the old adhesive?
A: No. Old adhesive loses strength and should always be replaced.
Q: Do I need to remove the battery completely?
A: No. Disconnecting the battery connector is sufficient.
Q: Is testing the camera before sealing necessary?
A: Yes. Always test before final assembly.
Troubleshooting (After The Repair)
Q: Front camera still not working after replacement.
A: Reseat the camera connector and ensure it is properly aligned.
Q: Camera app crashes when switching to front camera.
A: The camera flex may not be connected securely or the replacement camera may be defective.
Q: Screen lifts after reassembly.
A: Insufficient adhesive or clamping time. Reapply adhesive and clamp longer.
Q: Touch stops working after repair.
A: The touch connector may be loose—reopen and reseat it.
Conclusion
We hope you’ve enjoyed this iPad Mini 6 (2021) front camera replacement guide. With careful heating, proper connector handling, and correct sealing, this repair can be completed successfully at home.
If you have any questions, feel free to ask.
Please like, share, and comment on our videos, and don’t forget to subscribe to Geardo for more repair guides
Related Guides
