Now Reading: iPhone XR Back Camera Replacement Guide
-
01
iPhone XR Back Camera Replacement Guide
iPhone XR Back Camera Replacement Guide
Today, we’re going to show you how to replace the rear camera on the iPhone XR mobile phone.
Rear camera issues on the iPhone XR can include blurry photos, camera shaking, black screen, focus problems, or the camera app not opening at all. In most cases, these problems are caused by a faulty camera module and can be fixed by replacing it.
In this guide, we’ll walk you through each step carefully, from opening the device to removing the faulty rear camera and installing a new one. We’ll also share important tips, testing steps, and technical FAQs to help ensure a successful repair.
Compatibility and Model Numbers
Compatible Mode Numbers l A2105, A1984, A2107, A2108, A2106
Tools You Need
- Heating pad / heat gun / hairdryer
- Suction cup
- Plastic card pry tools / opening picks / Tweezers
- Phillips PH000/PH00 screwdriver
- Pentalobe P2 Screwdriver (for bottom screws)
- Tri-Point Y000 Screwdriver (in rare cases)
- Adhesive (B7000 or double-sided frame adhesive)
- Pre-cut water-seal adhesive
- Bonding clips or rubber bands (optional but recommended)
Read More About Choosing Repair tools
How to Find Tools and Parts
- Heating pad – https://amzn.to/3H0tHzJ
- Portable Heat Gun – https://amzn.to/4mszih1
- Clamps https://amzn.to/3GYJT4w
- STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
- Glue | Adhesive https://amzn.to/46exVxe
- Compatible Parts https://amzn.to/3Vi5fx2
- Silicone Work Repair Mat https://amzn.to/45Emz5l
Pro Tip: Keep screws organized. iPhone XR screws vary in size, and incorrect placement can damage internal components.
Repair Difficulty & Time Estimate
Difficulty Level:
🟠 Medium
This repair requires screen removal and handling delicate connectors but does not need full logic board removal.
Estimated Time Required:
⏱ 25–40 minutes
Step-by-Step Rear Camera Replacement Instructions
Step 1: Power Off & Remove SIM Tray
- Turn off the iPhone XR completely.
- Remove the SIM tray using a SIM ejector tool.
- Using a Pentalobe screwdriver, remove the two bottom screws next to the charging port.
Step 2: Heat the Screen Adhesive
- Gently heat around the screen edges to soften the adhesive.
- Place the front screen side down on a heating pad, select the mobile phone heating option, and wait for the cycle to complete.
- Alternatively, use a heat gun or hairdryer, keeping it 10–15 cm away.
Tip: Avoid overheating to prevent display or battery damage.
Step 3: Lift the Screen
- Use a double-sided suction cup to lift the front assembly.
- If unavailable, use a regular suction cup with a plastic card or triangle picker.
- Carefully loosen the rubber gaskets around the frame.
- Lift the screen like opening a book, keeping one side hinged.
Step 4: Disconnect Battery & Display
- Remove the shield by undoing three screws.
- Disconnect the battery connector first to prevent short circuits.
- Remove the screen and earpiece connector shields by undoing six screws.
- Undo the screw, remove the bracket, and disconnect:
- Earpiece assembly connector
- LCD connector
- Touch connector
Now the front screen assembly can be separated from the body.
Step 5: Remove the Faulty Rear Camera
- Locate the rear camera module on the logic board.
- Remove the camera shield by undoing two screws.
- Disconnect the rear camera connector.
- Carefully lift and remove the camera using a plastic pry tool or tweezers.
Important: Avoid touching the camera lens to prevent fingerprints or dust.
Step 6: Install the New Rear Camera
- Place the new rear camera module into the body.
- Connect the camera connector securely to the board.
- Reinstall the camera shield and secure it with two screws.
If Your iPhone XR Front Camera Is not working
Step 7: Apply Water-Seal Adhesive
- Add the pre-cut water-seal adhesive around the frame.
Note: This adhesive restores basic protection but does not make the device waterproof.
Step 8: Reconnect Screen & Test
- Connect the LCD, Touch, earpiece assembly, and battery connectors.
- Power on the device and test:
- Rear camera image clarity
- Focus and zoom
- Video recording
- Flash functionality
If everything works correctly, proceed with final assembly.
Step 9: Reinstall Shields & Close the Phone
- Place all three shields and the bracket back into position.
- Secure them with the correct screws.
- Be gentle and avoid overtightening.
Step 10: Clamp the Phone
- Click in the top section first.
- Then press the sides and bottom simultaneously.
- Apply pressure only on the frame edges.
Step 11: Final Assembly
The iPhone XR rear camera replacement is now complete.
Reinsert the SIM tray.
Install the two bottom screws using a Pentalobe screwdriver.
No Camera / Camera Not Working After Replacement – Troubleshooting
1. Check Camera Connector
- Ensure the rear camera connector is fully seated
- Reconnect it and test again before sealing the phone
2. Inspect the Camera Shield
- Make sure the shield is installed correctly
- Missing or loose screws can cause camera malfunction
3. Confirm Camera Compatibility
- Ensure the replacement camera is specifically for iPhone XR
- Incompatible parts may cause black screen or focus issues
4. Clean the Camera Lens
- Dust or fingerprints can cause blurry images
- Clean gently using a microfiber cloth
5. Test Before Final Assembly
Always test the camera before closing the phone:
- Open Camera app
- Take photos and videos
- Test flash
FAQs
1. Why is my iPhone XR rear camera blurry or shaking?
This usually indicates a faulty camera module and requires replacement.
2. Do I need to remove the logic board to replace the rear camera?
No. The rear camera can be replaced after disconnecting the screen.
3. Will replacing the camera affect Face ID?
No. Face ID uses the front camera system and is not affected.
4. Should I test the camera before sealing the phone?
Yes, always test camera functionality before final assembly.
5. Can a loose connector cause camera failure?
Yes. Even a slightly loose connector can cause the camera not to work.
6. Will water-seal adhesive make the phone waterproof again?
No. It provides limited protection only.
Related Repair Guides
