Samsung Galaxy A13 Screen Replacement Guide

Hi everyone, welcome back to DIYGeardo.

Today, we’ll show you how to replace the LCD screen display on the Samsung Galaxy A13 4G smartphone step by step.

A cracked or unresponsive screen is one of the most common issues with the Galaxy A13 4G, and replacing the display is an effective way to restore full touch functionality and visual clarity. In this guide, we’ll walk you through the complete screen replacement process, including safe disassembly, component transfer, and proper reassembly.

This repair requires removing several internal components, so take your time and follow each step carefully. With the right tools, proper handling, and a little patience, this repair can be done successfully at home or in a professional repair environment.

Before starting, make sure the phone is powered off and all data is backed up.
Now, let’s begin the Samsung Galaxy A13 4G LCD screen replacement.

---

Compatibility and Model Numbers

This repair guide based on Samsung Galaxy A13 4G device, but it also compatible with Galaxy M13 4g and Galaxy F13 models.

Compatible Mode Numbers l SM-A135F, SM-A135F/DS, SM-A135M, SM-A135U, SM-A135U1, SM-A135N, SM-A137F, SM-A137F/DSN, SM-A137F/DS, SM-M135F, SM-M135F/DSN, SM-E135F, SM-E135F/DS

---

Before You Begin

Required Tools

• Heating pad / heat gun / hairdryer
• Suction cup
• Plastic card pry tools / opening picks
• Phillips screwdriver
• Adhesive (B7000 or double-sided back cover adhesive)
• Bonding clips or rubber bands (optional but recommended)

Make sure the phone is turned off and the SIM tray is removed before starting.

How to Find Tools and Parts

• Heating pad – https://amzn.to/3H0tHzJ
• Portable Heat Gun – https://amzn.to/4mszih1
• Clamps https://amzn.to/3GYJT4w
• STREBITO 142 Piece Repair Tool Kit https://amzn.to/3UO1jUx
• Glue | Adhesive https://amzn.to/46exVxe
• Compatible Parts –
  • Battery – https://amzn.to/4mwa41Z
  • Screen – https://amzn.to/4n0XV4X
  • Other Parts – https://amzn.to/41lzman
• Silicone Work Repair Mat https://amzn.to/45Emz5l

---

Estimated Repair Time

⏱ 45–60 minutes

Repair Difficulty

🛠 Moderate
(Suitable for beginners with patience and proper tools)

---

Step-by-Step Repair Instructions

Step 1: Power Off & SIM Tray

First, turn off the phone completely.
Remove the SIM tray, then proceed with the back cover removal.

Step 2: Remove the Back Cover

Create a small gap near the SIM slot or charging port using a picker or plastic card pry tool.
Insert the pry tool and gently move around the phone to release the plastic clips.

⚠️ Be gentle — the fingerprint sensor is attached to the back cover.

Step 3: Remove Board Cover & Disconnect Battery

Undo eight screws and remove the board cover.
Disconnect the battery connector, then disconnect the fingerprint button flex to fully release the back cover.

Step 4: Disconnect Display & Remove Battery

Disconnect the LCD display connector.
To remove the battery, apply gentle heat or add isopropyl alcohol to soften the adhesive.
Use a plastic card pry tool to cut the glue and lift the battery carefully.

Step 5: Remove Logic Board & Internal Components

• Disconnect both antenna heads
• Undo the screw securing the logic board
• Carefully remove the logic board
• Apply heat and remove the earpiece module
• Apply heat and remove the button flex

Step 6: Remove Lower Components

Undo eight screws and remove the speaker cover.
Disconnect the secondary LCD connector and undo the board screw.
Loosen antenna cables and gently pull out the charging port board.

Next:

• Remove the vibrator motor using heat
• Remove the loudspeaker module using heat

Step 7: Screen Assembly Replacement

At this stage, only the damaged screen with frame remains.

Screen Options Available:

• With frame (recommended)
• Without frame
• Original, refurbished, used, or aftermarket

💡 Recommendation:
Choose a screen with frame installed.
It makes the repair much easier, and the price difference is minimal.

Reassembly Process

On the new screen frame:

1. Install the button flex
2. Secure the earpiece module
3. Place and secure the logic board
4. Install the speaker
5. Secure the vibrator motor
6. Install the charging port board and secure it
7. Connect the secondary LCD flex
8. Route and secure both antenna cables
9. Connect antenna heads to the logic board
10. Install the speaker cover with eight screws
11. Place the battery with adhesive
12. Connect the LCD flex
13. Connect the fingerprint flex
14. Connect the battery connector
15. Install the board cover with eight screws

Final Step

Snap the back cover into place and press around the edges to secure all clips.
Insert the SIM tray, power on the phone, and test all functions.

---

FAQs

1. Is the Samsung Galaxy A13 4G screen fused with the frame?
Yes, the display and frame are commonly sold together, which simplifies the repair.

2. Can I replace the screen without removing the battery?
No. The battery must be disconnected for safety and to access internal components.

3. Does Galaxy A13 4G use an AMOLED display?
No, it uses a PLS LCD panel.

4. Are Galaxy A13 4G and A13 5G screens interchangeable?
No. They are different in size, connectors, and mounting.

5. Will aftermarket screens affect touch sensitivity?
Quality aftermarket screens work fine, but low-quality panels may have touch or brightness issues.

---

Galaxy A13 Screen Repair Troubleshooting FAQ’s

1. Screen doesn’t turn on after replacement
Check the LCD connector and battery connection. Reseat the display flex.

2. Touch works but no display
The backlight may not be connected properly, or the screen could be defective.

3. No network signal after repair
Ensure both antenna cables are properly connected and routed correctly.

4. Fingerprint sensor not working
Recheck the fingerprint flex connection to the motherboard.

Related Guides

More Samsung Galaxy A13 Repair Guides